Wiltshire · England
Bath Repair for Redstocks homes
Problem with your bath in Redstocks? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
Bath repair in Redstocks, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour-matched so it blends in. We regularly repair cast iron enamel, whirlpool & spa baths and acrylic, and the jobs we see most are cracks in an acrylic bath and rust by the waste and overflow.
Every job is backed for twelve months in Redstocks and everywhere else. If something goes wrong with the work, we come back.
- Location
- Redstocks (SN12)
- Region
- Wiltshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
Our prices are the same across the UK, with no extra for Redstocks. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Natural light rather than flash
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Signs you need bath repair in Redstocks
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Common reasons people in Redstocks contact us are:
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
What to look for in a quote
- How the room is protected while they work
- How long the guarantee is and what it covers
- How to look after the finish
- Whether there are any call-out or travel charges
Where we work around Redstocks
Redstocks is about 2 miles south-east of Melksham, in Wiltshire. From the centre of Redstocks to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Redstocks is one of 425 places in Wiltshire where we work. You can also see our page for Birmingham, about 77 miles away.
Here we cover the SN12 postcode area. From Bath Road and Carnation Lane or a nearby road, a technician can come to you. Nearby, we also work in Bowerhill (1 mile west), The Stocks (1 mile south), Sandridge (1 mile north), Melksham (2 miles north-west) and Berryfield (2 miles west). We also work in nearby towns such as Trowbridge (5 miles south-west), Chippenham (7 miles north), Calne (7 miles north-east), Devizes (5 miles east), Westbury (8 miles south-west) and Warminster (12 miles south).
Near you in Redstocks
Our customers here include homes close to Melksham Oak Community School, Church of the Holy Cross and The Barge Inn and the streets around them. For rail, the closest station is Melksham station, about 2.4 miles north-west. Further afield, we also cover the area around Avon Tyre Museum (2.4 miles north-west) and Melksham Community Hospital (1.4 miles west).
Landlords, agents and businesses in Redstocks
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also near Redstocks
What else we do in Redstocks
The process
We work cleanly and quietly. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Keeping it looking good
Once the work has cured, treat it gently:
- Do not leave a fresh chip for long
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
FAQs for Redstocks
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
The entire UK, including all of Wiltshire. Just include your postcode and we will confirm dates.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
