Wiltshire · England
Bath chip & crack repair in Sandridge, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Sandridge, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
Bath repair at your home in Sandridge
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the next day. Typical jobs include chips along the edge of the bath and an old repair that has yellowed or come loose, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
Every repair is covered by a one-year guarantee.
- Area
- Sandridge (SN12, SN15)
- County
- Wiltshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- How many items we do on one visit
- The material
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- A picture taken from further back
- Details of any past repairs
- One sharp close-up of the damage
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Towns and villages near Sandridge
More services for Sandridge
What we’re called out for in Sandridge
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people get in touch when they notice something like this:
- Rust spots around the plughole
- Chips caused by builders
- Chips under the taps
- Scuffs and scratches in the surface
Questions to ask before you book
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
- How soon you can use it again
- Whether the price covers travel
Our work in Sandridge
Sandridge is about 1 mile east of Melksham, in Wiltshire. We visit clients in Sandridge, so there’s no workshop to go to. We cover all 425 towns and villages in Wiltshire. Our jobs stretch from Sandridge to Birmingham (about 76 miles away).
Every address in SN12 and SN15 is covered, from the main roads to the quietest streets. Nearby, we also work in Melksham (1 mile west), Redstocks (1 mile south), Bowerhill (2 miles south-west), Beanacre (2 miles north-west) and Berryfield (2 miles south-west). Further out, we also cover Trowbridge (6 miles south-west), Chippenham (5 miles north), Calne (6 miles north-east), Devizes (5 miles east), Westbury (9 miles south-west) and Warminster (13 miles south).
Landmarks near Sandridge
Typical jobs here are in homes near Forest and Sandridge Church of England Primary School, Church of St Andrew and Melksham Oak Community School. The nearest railway station is Melksham station, roughly 1.9 miles west. Further afield, we also cover the area around Avon Tyre Museum (1.9 miles west) and Shane's Castle (4.5 miles south-east). The countryside around Sandridge includes King's Play Hill.
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
FAQs for Sandridge
How do I get a price for bath repair in Sandridge?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item with your SN12 postcode.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We leave the room as we found it
- Normally one visit, start to finish
- Fixed prices from your pictures
- Everything repaired in place
Read our full price list and resurfacing vs replacement cost guide.
What we can’t put right
To be straight with you, some problems need a different fix:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
To keep it looking its best:
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- Don’t scrub with anything abrasive
- Do not leave razors or cans standing in the bath
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
