Dorset · England
Bath chip & crack repair in Melplash, Dorset
Fixed-price bath repair in Melplash and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
Do you need bath repair in Melplash?
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- Chips on the rim or sides
- A failed DIY repair that’s discoloured or lifting
- A chip where the taps sit
- Deep scratches in acrylic
Before you book anyone
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- What happens if they find more damage
- What aftercare is recommended
Bath repair at your home in Melplash
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with rust spots around the plughole and holes from dropped items, we can help, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Where
- Melplash (DT6)
- Region
- Dorset
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Melplash
Also in Melplash
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
Getting a price
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in Melplash, and we’ll come back with a fixed quote.
Related advice
Our work in Melplash
Melplash is about 3 miles north of Bridport, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 462 towns and villages across Dorset, from the larger towns to small villages.
Jobs in DT6 work the same way as everywhere else we cover. We regularly work on streets such as Twinways Lane, Mapperton Lane and Crooked Oak Hill. Neighbouring places we cover include The Mount (1 mile south), Netherbury (1 mile north-west), West Milton (1 mile south-east), Salway Ash (2 miles south-west) and Bradpole (2 miles south). Within a short drive, we also cover Dorchester (13 miles east), Bridport (3 miles south), Sherborne (15 miles north-east), Fordington (14 miles east), Lyme Regis (10 miles west) and Chickerell (15 miles south-east).
Landmarks near Melplash
Around Melplash, we work in homes near The Sir John Colfox Academy and Christ Church. Other landmarks nearby include Beaminster Museum (2 miles north) and Burcomb Wood (1.6 miles east). For a walk, there’s Waddon Hill.
Melplash questions
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Why repair rather than replace?
Many people think a damaged bath means a new one. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- No need to remove anything
- One price list for the entire UK
Read our pricing and bath cost comparison.
What bath repair costs
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- What the surface is made of
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Landlords, agents and businesses in Melplash
We work for landlords, letting agents and housing providers in Melplash as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
How to care for the repair
Most damage we see is avoidable. These habits help:
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
