Greater London · England

Bath Repair for Merton Abbey homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Merton Abbey, with a one-year guarantee on every repair.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Merton Abbey

Our work in Merton Abbey

Merton Abbey is about 2 miles south-east of Wimbledon, in Greater London. From the centre of Merton Abbey to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Merton Abbey is one of 764 places in Greater London we cover. Our jobs stretch from Merton Abbey to London (about 7 miles away).

We work across the SW19, CR4 and SW17 postcode area. Whether you live on East Road, Hardy Road and Mount Road or anywhere nearby, we can come to you. Merton Abbey is on the A24, so it’s easy for us to reach. If you are just outside Merton Abbey, we cover Merton (1 mile west), Colliers Wood (1 mile north-east), South Wimbledon (1 mile north-west), Eastfields (1 mile east) and Tooting Bec (1 mile north-east). Within a short drive, we also cover London (7 miles north-east), City of Westminster (7 miles north), Marylebone (7 miles north), Kensington (6 miles north), St Pancras (8 miles north) and Shoreditch (9 miles north-east).

Near you in Merton Abbey

Our customers here include homes close to King's Head pub, Christ Church Colliers Wood and Rutlish School, among other places. You’ll also find Haslemere Primary School (within half a mile south), Wandle Park (within half a mile north) and Ensham School (1.2 miles north-east). For rail, the closest station is Haydons Road station, about 0.9 miles north of the centre. Other landmarks nearby include Southside Wandsworth (3 miles north) and St George's Hospital (1 mile north). Green spaces nearby include Henman Hill and Battersea Park Lake.

  • Other local spots include St Leonard's (2.5 miles north-east)
Map of Merton Abbey © OpenStreetMap contributors

Bath repair at your home in Merton Abbey

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s rust spots around the plughole and a chipped rim or side, we can help.

You get a one-year guarantee, the same in Merton Abbey as everywhere else we work.

Location
Merton Abbey (SW19, CR4, SW17)
County
Greater London
Guarantee
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Common questions in Merton Abbey

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

How long before I can use the bath?

Most baths can be used the next day. We’ll tell you the exact curing time when we finish.

What happens after I send pictures?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Is there any odour?

It depends on the job, but often a little. Open windows and an extractor fan help.

Can you quote from pictures?

In nearly every case. If photos don’t show enough, we will ask for another angle.

What does bath repair cost?

Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your SW19 postcode.

Common problems we fix in Merton Abbey

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Common reasons people in Merton Abbey contact us include:

  • Rusty patches near the plughole
  • Scratches you can feel with a fingernail
  • A failed DIY repair that is discoloured or lifting
  • Holes from dropped items

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • How to look after the finish
  • What protection goes down before work starts
  • What preparation is included

Our hiring checklist

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

What affects the price in Merton Abbey

Prices start from £95. There’s no charge for travel to Merton Abbey. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • Whether we combine several jobs

Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Send photos for a quote

Good photos mean an accurate price. Here’s what helps:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Whether it’s been repaired or coated before

For a price in Merton Abbey, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Landlord and trade work in Merton Abbey

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Repair or replace in Merton Abbey?

Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • Dust sheets down, tidy finish
  • Colours mixed by hand to suit your surface
  • Fixed prices from your pictures
  • Work done at your home or business

Take a look at our pricing or bath cost comparison.

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Have new chips seen to early
  • Clean with warm water and a mild detergent
  • Do not leave razors or cans standing in the bath
  • Put a towel in the bath if you are working above it

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Let us know about parking or access
  • Ensure the area is dry
  • Let us know if it has been repaired before

Ask for a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.

Send photos for a quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.