Greater London · England
Bath chip & crack repair in Mile End, Greater London
We travel to Mile End for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- Chips along the edge of the bath
How we handle bath repair in Mile End
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for rust by the waste and overflow and snagging damage from a refit, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
Every repair comes with our one-year guarantee, wherever you are in Greater London.
- Area
- Mile End (E3, E1, E14)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Towns and villages near Mile End
What else we do in Mile End
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What affects the price in Mile End
Repairs from £95. You won’t pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- The material
- Doing more than one item at once
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One picture of the entire bath
- The postcode, so we can plan the visit
Send us a photo of the damage and one of the entire item, and tell us you are in Mile End, and we’ll reply with a fixed quote.
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
FAQs for Mile End
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Mile End.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Are there extra charges for Mile End?
There is no separate call-out charge. Your fixed quote includes everything.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
The process
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Tell us about any previous repairs or coatings
How to get a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Mile End
- Normally one visit, start to finish
- CHAS and Constructionline accredited
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
See our prices page or guide to resurfacing and replacement costs.
Mile End and the surrounding area
Mile End is about 2 miles east of Whitechapel, in Greater London. Across the E3 area, we come to you. We work in 764 places in Greater London.
Postcode districts we cover here: E3, E1 and E14. From Bow Road, Bale Road and Toby Lane or anywhere nearby, a technician can come to you. You’ll find Mile End on the A1205, which makes it straightforward to reach. Other places close to Mile End include Bow (1 mile north), Bow Common (1 mile south-east), Bromley (1 mile east), Limehouse (1 mile south) and Donnybrook Quarter (1 mile north). Within a short drive, we also cover London (3 miles south-west), City of Westminster (5 miles west), Marylebone (5 miles west), Kensington (8 miles west), St Pancras (4 miles west) and Walthamstow (4 miles north).
Local landmarks in Mile End
Locally, our jobs take us to homes close to Central Foundation Girls' School, Mile End Park and Malmesbury Primary School. Nearby too are Beatrice Tate School (less than half a mile south-east), Holy Trinity Church (less than half a mile north-west) and Lord Tredegar Public House (less than half a mile north). The nearest railway station is Limehouse station, roughly 0.9 miles south. Other landmarks nearby include Westfield Stratford City (1.7 miles north-east) and Tower of London (2.2 miles south-west). Green spaces nearby include Old Ford Island and Tower Hill.
- Other local spots include Holy Trinity (0.7 miles west)
How to look after the repair
Once the work has cured, treat it gently:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Landlord and trade work in Mile End
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Mile End, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
