Staffordshire · England
Non-slip bath & shower coating in Milford, Staffordshire
Fixed-price non-slip bath coating in Milford and the surrounding area, normally in one visit and guaranteed for a year.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
What affects the price in Milford
Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- How hard the colour is to match
- Whether we combine several jobs
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the entire bath or shower tray
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
About our non-slip bath coating in Milford
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can normally put it right, on shower trays, enamelled baths and resurfaced baths alike.
Every repair is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Milford (ST17)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Milford, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
What a repair cannot fix
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
Towns and villages near Milford
Also in Milford
Repairing versus replacing in Milford
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there’s no premium for Milford. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Milford customers choose us
- No need to remove anything
- Same prices wherever you are
- A fixed quote before you book
- Rooms protected and left tidy
Read our pricing.
Where we work around Milford
Milford is about 3 miles east of Stafford, in Staffordshire. Anywhere in ST17, a technician comes to you. Milford is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 23 miles away.
Here we cover the ST17 postcode area. Streets in the area include Holdiford Road, Brocton Road and Main Road, all of which we cover. Other places close to Milford include Tixall (1 mile north), Walton-on-the-Hill (1 mile west), Brocton (1 mile south), Berkswich (1 mile west) and Baswich (2 miles west). Within a short drive, we also cover Stafford (3 miles west), Cannock (6 miles south), Lichfield (12 miles south-east), Longton (14 miles north), Rugeley (5 miles south-east) and Burntwood (9 miles south-east).
What’s near Milford
Typical jobs here are in homes near Walton High School, Berkswich CofE (VC) Primary School and Shugborough Park and the streets around them. The nearest railway station is Stafford station, roughly 3.5 miles west. Further afield, we also cover the area around Stafford Castle (4.5 miles west) and The Staffordshire Police Museum (1.7 miles west). The countryside around Milford includes Tixall Wide and Radford Meadows.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a morning or an afternoon. Before we go, we’ll explain when it can be used and how to care for it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Milford, and we will reply with a fixed quote.
Read more
When to call us in Milford
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
These are the problems we’re asked about most:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Questions to ask before you book
- What preparation is included
- How to care for the finish
- How your room will be protected
- How long the guarantee is and what it covers
Milford: your questions answered
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
About our accreditations · Every repair comes with a one-year guarantee.
