Glasgow · Scotland
Bath chip & crack repair in Milton, Glasgow
We travel to Milton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
How we handle bath repair in Milton
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Whether it’s rusty patches near the plughole and damage done while the bathroom was being fitted, we can typically put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Milton (G22, G20, G23)
- Area hub
- Glasgow
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Milton questions
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Do you cover the whole of Glasgow?
Across the UK, so Milton is covered. Our prices are the same everywhere.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.
How do I get a price for bath repair in Milton?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your G22 postcode.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
When a repair isn’t the answer
It helps to know what we cannot do too:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Where we work around Milton
Milton is about 2 miles north-east of North Kelvinside, in Glasgow. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Milton is one of 183 places in Glasgow where we work.
Our visits in G22, G20 and G23 work the same way as everywhere else we cover. Whether you live on Birsay Road, Balmore Road and Hillend Road or a nearby road, we can come to you. With the A879 close by, Milton is easy for our technicians to reach. Nearby, we also work in Parkhouse (1 mile south), Lambhill (1 mile south-west), Colston (1 mile east), Possilpark (1 mile south) and Cadder (1 mile west). Further out, we also cover Glasgow (3 miles south), Partickhill (3 miles south-west), Yorkhill (3 miles south-west), Hyndland (3 miles south-west), Calton (3 miles south) and Langside (5 miles south).
What’s near Milton
Locally, our jobs take us to homes close to John Paul Academy, Glasgow and Springburn Park and the streets around them. For rail, the closest station is Possilpark & Parkhouse station, roughly 0.5 miles south. Other landmarks nearby include Heatherbank Museum of Social Work (2.1 miles south) and Chinatown (1.9 miles south). The countryside around Milton includes Bardowie Loch and Lenzie Moss.
Towns and villages near Milton
What else we do in Milton
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Landlord and trade work in Milton
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Milton as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
What we are called out for in Milton
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Damage done while the bathroom was being fitted
- Holes from dropped items
- Scratches you can feel with a fingernail
- Damage beneath the taps
Questions to ask before booking
- What protection goes down before work starts
- How long the guarantee is and what it covers
- What happens if they find more damage
- What preparation is included
How to look after the repair
To keep it looking its best:
- Rinse the bath after use, especially in hard water areas
- Don’t scrub with anything abrasive
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Milton. What changes the price is:
- The material
- The colour and finish to match
- Whether we combine several jobs
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A photo taken from further back
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
