Isle of Anglesey · Wales
Bath Repair in Moelfre
Bath repair across Moelfre and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
Bath repair in Moelfre, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. If you’re dealing with damage done while the bathroom was being fitted and chips on the rim or sides, we can generally put it right, on cast iron enamel, pressed steel enamel and roll-top & freestanding alike.
Every repair is covered by our one-year guarantee, wherever you are in Isle of Anglesey.
- Where
- Moelfre (LL72)
- Area hub
- Isle of Anglesey
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Moelfre?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we’re called about are:
- Snagging damage from a refit
- Scuffs and scratches in the surface
- Damage beneath the taps
- A cracked acrylic bath
Before booking anyone
- Whether the price is fixed and includes VAT
- How your room will be protected
- When it can be used again
- Aftercare advice
Towns and villages near Moelfre
What else we do in Moelfre
What affects the price in Moelfre
Repairs from £95. You’ll know the full cost before you book. We look at:
- The size and number of damaged areas
- How many items we do on one visit
- The material and finish
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Getting a price from pictures
You can take the photos on your phone, there’s no need for anything special. Ensure they show:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Most clients in Moelfre get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
About Moelfre
Moelfre is about 10 miles north-west of Bangor, in Isle of Anglesey. Whether you are in the middle of Moelfre or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Moelfre is one of 115 places in Isle of Anglesey we cover. You can also see our page for Liverpool, about 54 miles away.
Jobs in LL72 work the same way as everywhere else we cover. Whether you live on Rhosffordd, Maes Hyfryd and Ffordd Eleth or a nearby road, a technician can come to you. With the A5108 close by, Moelfre is simple for us to get to. We also cover the places around Moelfre: Marianglas (1 mile south), Nant y Perfedd (1 mile west), Tyn-y-gongl (2 miles south), Benllech (2 miles south) and Llaneugrad (2 miles south-west). We also work in nearby towns such as Llangefni (7 miles south-west), Menai Bridge (9 miles south), Porthaethwy (9 miles south), Amlwch (6 miles north-west), Llanfair Pwllgwyngyll (9 miles south) and Beaumaris (9 miles south-east).
Landmarks near Moelfre
We visit homes around St Gallgo's Church and Kinmel Arms. A little further out are Moelfre RNLI Seawatch Centre (less than half a mile east). Not far away are Sotherby Top and Llyn Bodafon.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave razors or cans standing in the bath
- Put a towel in the bath if you’re working above it
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Moelfre. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We leave the room as we found it
- Colour-matched on site
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
See our prices page and resurfacing vs replacement cost guide.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to two to three hours for most chips.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Read more
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Moelfre: your questions answered
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
