Kent · England
Bath chip & crack repair in Molash, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Molash and across Kent. Free, fixed quotes from your photos.
- Repairs from £95
- Chips under the taps
- Chips along the edge of the bath
Bath repair at your home in Molash
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s deep scratches in acrylic and snagging damage from a refit, we can typically put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Molash (CT4)
- Area hub
- Kent
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Other services in Molash
Keeping it looking good
How the surface is treated afterwards matters:
- Rinse it down after each bath
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Molash and nearby
Molash is about 6 miles south of Faversham, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 922 towns and villages in Kent. We work right across the region, from Molash to London (47 miles away).
Here we cover the CT4 postcode area. Jobs here include addresses on The Street, Pound Lane and Church Lane and the roads around them. We also cover the places around Molash: Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). Within a short drive, we also cover Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).
What’s near Molash
Typical jobs here are in homes near George Inn and Church of St Peter and the streets around them. The closest station to Molash is Wye station, about 3.2 miles south. Nearby you will also find Tower keep castle at Chilham (2.7 miles east).
Common problems we fix in Molash
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
These are the problems we’re asked about most:
- A failed DIY repair that’s discoloured or lifting
- A chip where the taps sit
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
Before you book anyone
- What protection goes down before work starts
- Whether the price covers travel
- What preparation is included
- Whether the colour is mixed to match
How we price bath repair
Repairs from £95. We charge the same across the UK, including Molash. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Details of any past repairs
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow a morning or an afternoon, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Repair or replace in Molash?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- No need to remove anything
- Colour-matched on site
Read our pricing or bath cost comparison.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Molash: your questions answered
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
What areas do you cover?
All of Kent, and the rest of the UK. Travel is included in the price.
Can you repair a hole in a bath?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you cover Molash?
Yes. We cover the whole UK and come to Molash and the rest of Kent. Send pictures and we’ll quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
