Dumfries and Galloway · Scotland

Bath Repair for Moniaive homes

Bath repair in and around Moniaive: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Moniaive

How we handle bath repair in Moniaive

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. Common call-outs are for rust by the waste and overflow and a failed DIY repair that’s discoloured or lifting, across pressed steel enamel, cast iron enamel and whirlpool & spa baths.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Moniaive (DG3)
Area hub
Dumfries and Galloway
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Stick to mild cleaners and a soft cloth
  • Cover the bath during DIY or decorating
  • Don’t leave a fresh chip for long

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.

When we would advise against a repair

Some jobs are not right for a repair, including:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A steel bath rusted through
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding

What affects the price in Moniaive

Repairs from £95. Every quote is fixed and free. What we look at:

  • How much damage there is
  • What kind of damage it is
  • Where the damage is and how we get to it
  • The colour and finish to match

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Details of any past repairs
  • One picture of the whole bath

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

How the visit works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, depending on the damage, including clearing up.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, generally by the following day, the bath is ready to use.

Preparing for the visit

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Let the surface dry out before the visit

Getting a price

Send us pictures of the damage and one of the entire item, and tell us you’re in Moniaive, and we’ll reply with a fixed quote.

Get a free quote

Advice

Common questions in Moniaive

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Something went through my bath. Can it be fixed?

Often, if there’s access underneath. The hole is backed, filled and refinished to match.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Do you work in Moniaive?

Yes. We work across the UK and travel to Moniaive. Send us photos for a fixed quote, or call 0345 017 0787.

Is repairing better than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Landlord and trade work in Moniaive

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Moniaive and nearby

Moniaive is about 15 miles north-west of Dumfries, in Dumfries and Galloway. We visit homes and businesses in Moniaive and nearby villages, so nothing has to leave your home. Moniaive is one of 138 places in Dumfries and Galloway we cover. Our nearest city page is Glasgow, about 47 miles away.

Our repair technicians cover all of DG3 and the streets around it. Jobs here include addresses on High Street, Park Road and Ayr Street. We also cover the places around Moniaive: Penpont (5 miles north-east), Wallaceton (5 miles south-east), Keir Mill (5 miles east), Dunscore (7 miles south-east) and Thornhill (7 miles north-east). Larger places within reach include Dumfries (15 miles south-east), Heathhall (15 miles south-east), Newbridge Drive (14 miles south-east), Kirkconnel (13 miles north), Sanquhar (12 miles north) and Kelloholm (13 miles north).

Local landmarks in Moniaive

Typical jobs here are in homes near Cademuir International School and Moniaive and the streets around them. A little further out are The James Paterson Museum (less than half a mile north-west). For a walk, there is Bogrie Hill and Loch Urr.

Map of Moniaive © OpenStreetMap contributors

When to call us in Moniaive

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.

You may need us if you’ve spotted any of these:

  • Cracks in an acrylic bath
  • A chipped rim or side
  • Deep scratches in acrylic
  • Snagging damage from a refit

Questions to ask before booking

  • What happens if the damage is worse than the pictures show
  • How long it needs to cure
  • Who will actually do the work
  • How long the guarantee is and what it covers

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.