Warrington · England
Bath chip & crack repair in Moore, Warrington
We travel to Moore for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
How we handle bath repair in Moore
A typical bath repair is a few hours’ work, and you can usually bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for damage done while the bathroom was being fitted and damage beneath the taps, across whirlpool & spa baths, pressed steel enamel and acrylic.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Moore (WA4)
- Area hub
- Warrington
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Moore
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- A fixed quote before booking
- Honest advice, even when it means no job
- Work done at your home or business
- Everything repaired in place
Take a look at our full price list or bath cost comparison.
How to look after the repair
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
- Cover the bath during DIY or decorating
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Moore questions
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you cover the entire of Warrington?
The entire UK, including all of Warrington. Send your postcode with your pictures and we will confirm dates.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Towns and villages near Moore
Also in Moore
Honest limits
It helps to know what we can’t do:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
How we price bath repair
Repairs from £95. We do not charge extra for travel to Moore. The price comes down to:
- Unusual colours or finishes
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Phone pictures are fine. Just ensure we can see:
- Details of any past repairs
- A wider photo showing the entire bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
About Moore
Moore is about 3 miles north-east of Runcorn, in Warrington. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Moore is one of 72 towns and villages in Warrington where we work. Our jobs stretch from Moore to Liverpool (about 12 miles away).
Our visits in WA4 work the same way as everywhere else we cover. Jobs here include addresses on Lindfield Close, Runcorn Road and Beechmoore. Close by, we cover Keckwick (1 mile south-west), Moss Side (1 mile north-west), Higher Walton (1 mile east), Daresbury (1 mile south) and Sandymoor (1 mile south-west). Further out, we also cover Warrington (4 miles north-east), Golborne (9 miles north), Lymm (7 miles east), Fearnhead (5 miles north-east), Wilderspool (3 miles north-east) and Lowton (9 miles north).
Local landmarks in Moore
Our customers here include homes close to Sandymoor School, Morley Common and All Saints' Church, among other places. You will also find Moore Primary School (less than half a mile west) and The Red Lion Public House (within half a mile south-east). For rail, the closest station is Runcorn East station, about 2.1 miles south-west of the centre. A little further out are Halton Castle (2.8 miles south-west) and Museum of Policing in Cheshire (2.7 miles north-east). For a walk, there is Paddington Meadows.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It typically takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
