Herefordshire · England
Bath Repair in Mordiford
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Mordiford, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Scuffs and scratches in the surface
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why us?
- Work done at your home or business
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Fixed prices from your photos
See our full price list or resurfacing vs replacement cost guide.
Bath repair in Mordiford without replacing anything
You don’t need a new bath because of a chip. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and damage beneath the taps.
Whatever the size of the job, you get the same one-year guarantee in Mordiford and across Herefordshire.
- Location
- Mordiford (HR1)
- Region
- Herefordshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Mordiford
Also in Mordiford
Mordiford and nearby
Mordiford is about 5 miles east of Hereford, in Herefordshire. We visit customers in Mordiford and the surrounding area, so there’s no workshop to go to. Mordiford is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Mordiford to Birmingham (about 43 miles away).
Here we cover the HR1 postcode area. We also travel to Hampton Bishop (1 mile north-west), Holme Lacy (2 miles south-west), Fownhope (2 miles south), Dormington (2 miles north) and Tidnor (2 miles north-west). Larger places within reach include Hereford (5 miles west), Ross-on-Wye (8 miles south), Ledbury (8 miles east), Leominster (14 miles north), Redhill (5 miles west) and Newton Farm (5 miles west).
Landmarks near Mordiford
We visit homes around The Moon Inn, Church of the Holy Rood and Mordiford CofE Primary School and the streets around them. For rail, the closest station is Hereford station, about 4.3 miles north-west. Well-known places in the area include Williams' Hospital (4 miles west) and Lower Castle (3.7 miles north). Not far away are Dinedor Hill and Nupend Wood.
How we price bath repair
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The material
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- One picture of the entire bath
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
How to care for the repair
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Signs you need bath repair in Mordiford
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
People generally call us after spotting one of these:
- Scuffs and scratches in the surface
- Damage beneath the taps
- Chips caused by builders
- A hole punched through by something heavy
Comparing quotes
- What prep work is covered
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Who turns up on the day
Mordiford questions
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Which areas do you work in?
The whole UK, including all of Herefordshire. Just include your postcode and we’ll offer you dates.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is a cracked acrylic bath repairable?
Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
When a repair is not the answer
A repair isn’t right for every job, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
