Swansea · Wales
Bath chip & crack repair in Morfa, Swansea
Bath repair across Morfa and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Chips caused by builders
Keeping it looking good
To keep it looking its best for years:
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
- Have new chips seen to early
- Give the bath a quick rinse after use
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Bath repair at your home in Morfa
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Common call-outs are for scuffs and scratches in the surface and chips on the rim or sides, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Morfa (SA1, SA5, SA6)
- Area hub
- Swansea
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
- Keep a parking space free if you can
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Our work in Morfa
Morfa is about 1 mile north-east of Swansea, in Swansea. Wherever you are in the SA1 postcode area, a technician comes to you. We cover 153 places across Swansea.
Every address in SA1, SA5 and SA6 is covered, from the main roads to the quietest streets. We regularly work on streets such as Siloh Road, Eaton Road and Salem Road and the roads around them. Other places close to Morfa include Landore (1 mile south), Penfilia (1 mile north-west), Brynhyfryd (1 mile west), Plasmarl (1 mile north-east) and Lisbon (1 mile north-west). Larger places within reach include Gorseinon (5 miles west), Llwchwr (5 miles west), Mumbles (5 miles south-west), Norton (5 miles south-west), Tycoch (3 miles south-west) and Clydach (4 miles north-east).
Landmarks near Morfa
Typical jobs here are in homes near Pentrehafod School, Brynhyfryd Primary School and Siloh Welsh Congregational Chapel and the streets around them. You’ll also find Dynevor School (1.5 miles south), Cwm Level Park (within half a mile north) and The Station Inn (under half a mile west). Morfa’s nearest station is Swansea station, roughly 1.2 miles south of the centre. Other landmarks nearby include Mount Pleasant Hospital (1.3 miles south) and Original Swansea Castle (1.5 miles south). Not far away are Cnap-llwyd and Pluck Lake.
When we’d advise against a repair
Some jobs are not right for a repair, including:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- We leave the room as we found it
- Everything repaired in place
- One visit for most repairs
- Work done at your home or business
Read our pricing or bath cost comparison.
How we price bath repair
Repairs from £95. There’s no charge for travel to Morfa. The price comes down to:
- The type of damage
- Unusual colours or finishes
- Doing more than one item at once
- What the surface is made of
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Any details about the material
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Other services in Morfa
Questions from Morfa
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair something that’s been repaired before?
Most of the time. Tell us what was done before.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Morfa, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
