Cumbria · England
Bath Repair in Morland
Damaged bath in Morland? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Holes from dropped items
How to look after the repair
After the repair has cured, a few habits help it last:
- Fix dripping taps early to stop staining and limescale
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Don’t scrub with anything abrasive
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
About our bath repair in Morland
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and people most frequently call us about cracks in an acrylic bath and rust spots around the plughole.
Every job is backed for twelve months in Morland and everywhere else. If something goes wrong with the work, we come back.
- Area
- Morland (CA10)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Nearby places to Morland
More services for Morland
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a morning or an afternoon, tidy-up included.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Keep pets and children out of the room while we work
Getting a price
If you are in Morland and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
When to call us in Morland
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
People typically call us after spotting one of these:
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- Rust spots around the plughole
- Chips on the rim or sides
Before booking anyone
- What happens if they find more damage
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- How the colour is matched
Covering Morland
Morland is about 7 miles south-east of Penrith, in Cumbria. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 438 places in Cumbria. We work right across the region, from Morland to Newcastle upon Tyne (about 48 miles away).
Jobs in CA10 are booked in the same way as anywhere else. From Cobblestone Corner, Well Lane and Lower Gate or anywhere nearby, we can come to you. Other places close to Morland include King's Meaburn (1 mile south-east), Great Strickland (2 miles west), Bolton (2 miles east), Temple Sowerby (3 miles north) and Kirkby Thore (3 miles north-east). Larger places within reach include Penrith (7 miles north-west), Appleby-in-Westmorland (5 miles east), Fair Hill (8 miles north-west), Carleton (6 miles north-west), Kirkby Stephen (14 miles south-east) and Bongate (6 miles east).
Around Morland
In Morland, that means homes near St Laurence's Church and Morland Area CofE Primary School and the streets around them. A little further out are Lowther Castle (4.9 miles west).
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
FAQs for Morland
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Morland.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
How long does the repair take to cure?
Typically the next day. We’ll tell you the exact curing time when we finish.
Landlords, agents and businesses in Morland
If you manage property in Morland, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Repair or replace in Morland?
Replacing a fitted bath normally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
Why choose Surface Doctor in Morland
- Colour-matched on site
- Rooms protected and left tidy
- Nothing taken out or refitted
- Every repair guaranteed for a year
Read our full price list and bath cost comparison.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- How easy the damage is to reach
- The type of damage
- How many items we do on one visit
- The material
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- Something in shot to show the size
To get a price, send two or three pictures through our quote form or ring us. We will say straight away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
