Norfolk · England
Bath Repair in Morston
Bath repair in and around Morston: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Damage beneath the taps
Bath repair in Morston without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people get in touch are deep scratches in acrylic and snagging damage from a refit.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Morston (NR25)
- County
- Norfolk
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Read more
Places near Morston
More services for Morston
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Landlords, agents and businesses in Morston
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- The material
- What kind of damage it is
- How many items we do on one visit
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One picture of the entire bath
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Common questions in Morston
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Which areas do you work in?
We work UK-wide, so Morston is covered. Prices do not change with location.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Covering Morston
Morston is about 19 miles north-west of North Walsham, in Norfolk. From the centre of Morston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 797 places in Norfolk, from the larger towns to small villages.
Our visits in NR25 are booked in the same way as anywhere else. Whether you live on The Street, Binham Lane and Quay Lane or a nearby road, we can come to you. We also cover the places around Morston: Blakeney (1 mile east), Langham (2 miles south), Wiveton (2 miles east), Stiffkey (2 miles west) and Cley next the Sea (3 miles east). We also work in nearby towns such as Sheringham (9 miles east), Cromer (13 miles east), Fakenham (10 miles south-west), Holt (6 miles south-east), Wells-next-the-Sea (6 miles west) and Reepham (14 miles south).
Local landmarks in Morston
Locally, our jobs take us to homes close to The Anchor Public House and Church of All Saints, among other places. Nearby you will also find The Shell Museum (2.7 miles south-east). The countryside around Morston includes Blakeney Point.
When a repair isn’t the answer
It helps to know what we can’t do too:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What we’re called out for in Morston
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a photo if you notice any of these:
- Damage beneath the taps
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- Chips along the edge of the bath
What your quote should include
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Who will actually do the work
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Morston customers choose us
- Every repair guaranteed for a year
- Technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
