Norfolk · England
Bath Re-enamelling in Morston
Local bath re-enamelling for Morston: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Several chips and rust patches
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- One-year guarantee on every repair
- Everything repaired in place
- A fixed quote before booking
- Colour mixed on the day to match
See our full price list or guide to resurfacing and replacement costs.
Bath re-enamelling at your home in Morston
We don’t move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the next day. If you are dealing with a bath in a colour that no longer suits and a dull, rough surface that won’t come clean, we can usually put it right, whatever the material.
A one-year guarantee comes as standard.
- Where
- Morston (NR25)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Morston
Other services in Morston
The process
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
How to get a price
If you’re in Morston and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Morston and the surrounding area
Morston is about 19 miles north-west of North Walsham, in Norfolk. Clients in Morston get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 797 towns and villages across Norfolk, from the larger towns to small villages.
Jobs in NR25 are booked in the same way as anywhere else. Whether you live on The Street, Binham Lane and Quay Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Blakeney (1 mile east), Langham (2 miles south), Wiveton (2 miles east), Stiffkey (2 miles west) and Cley next the Sea (3 miles east). Further out, we also cover Sheringham (9 miles east), Cromer (13 miles east), Fakenham (10 miles south-west), Holt (6 miles south-east), Wells-next-the-Sea (6 miles west) and Reepham (14 miles south).
Near you in Morston
In Morston, that means homes near The Anchor Public House and Church of All Saints, among other places. Other landmarks nearby include The Shell Museum (2.7 miles south-east). For a walk, there’s Blakeney Point.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Do you need bath re-enamelling in Morston?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Common reasons people in Morston contact us are:
- Several chips and rust patches
- Wear marks under the taps
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
What to look for in a quote
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- What protection goes down before work starts
Common questions in Morston
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you do the outside of a roll-top?
Yes. Inside and out.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do you come to Morston?
Yes. We cover the entire UK and come to Morston and the rest of Norfolk. Send us photos for a fixed quote, or call 0345 017 0787.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Access to the area
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- The material, if you know it
- Where you are, by postcode
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
