Shropshire · England
Bath Repair in Linley Brook
Bath repair in Linley Brook without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- A chipped rim or side
- Deep scratches in acrylic
How we handle bath repair in Linley Brook
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Typical jobs include rust spots around the plughole and cracks in an acrylic bath, in acrylic, pressed steel enamel and cast iron enamel.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Linley Brook (WV16)
- Area hub
- Shropshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Linley Brook
Linley Brook is about 4 miles north-west of Bridgnorth, in Shropshire. Whether you’re in the middle of Linley Brook or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover 433 places across Shropshire, from the larger towns to small villages. We work right across the region, from Linley Brook to Birmingham (25 miles away).
Jobs in WV16 are booked in the same way as anywhere else. We also cover the places around Linley Brook: Linley (1 mile north-east), Nordley (1 mile south-east), Willey (1 mile north-west), Morville (2 miles south) and Tasley (3 miles south). Within a short drive, we also cover Shrewsbury (15 miles north-west), Madeley (4 miles north), Coleham (14 miles north-west), Kingsland (15 miles north-west), Belle Vue (14 miles north-west) and Monkmoor (14 miles north-west).
Around Linley Brook
Typical jobs here are in homes near St Leonard's Church, among other places. A little further out are Bridgnorth Castle (3.9 miles south-east) and Broseley Pipeworks (2.8 miles north).
Other services in Linley Brook
Questions from Linley Brook
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath repair cost in Linley Brook?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your WV16 postcode.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before you book.
Materials we work on in Linley Brook
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Keeping it looking good
Nothing complicated is needed:
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave razors or cans standing in the bath
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Why Linley Brook clients choose us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- No extra charge for your area
- One visit for most repairs
Take a look at our prices page and guide to resurfacing and replacement costs.
Common problems we fix in Linley Brook
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
The things clients usually mention when they call include:
- Snagging damage from a refit
- Deep scratches in acrylic
- Impact holes in acrylic
- Rust by the waste and overflow
Before booking anyone
- The length of the guarantee and what it covers
- Who turns up on the day
- How the colour is matched
- Whether cleaning and preparation are in the price
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
