Cornwall · England
Bath chip & crack repair in Mount Ambrose, Cornwall
Fixed-price bath repair in Mount Ambrose and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Rust by the waste and overflow
Your questions about bath repair in Mount Ambrose
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How do I get a price for bath repair in Mount Ambrose?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How we handle bath repair in Mount Ambrose
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We work on cast iron enamel, acrylic and roll-top & freestanding, and common reasons people contact us are chips on the rim or sides and hairline or through cracks in acrylic.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Mount Ambrose (TR15, TR16)
- Area hub
- Cornwall
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Mount Ambrose
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
You may need us if you’ve spotted:
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- A kit repair that didn’t last
What to look for in a quote
- How your room will be protected
- Whether they match the colour on site
- How long the guarantee is and what it covers
- How changes to the job are handled
What affects the price in Mount Ambrose
Prices start from £95. We do not charge extra for travel to Mount Ambrose. The price depends on:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The colour and finish to match
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
To get a price, send two or three pictures using our quote form or ring us. We will say immediately whether it can be repaired.
Landlords, agents and businesses in Mount Ambrose
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Mount Ambrose as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Looking after it afterwards
Once the work has cured, treat it gently:
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We clean up when we are done and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
How to prepare
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Also in Mount Ambrose
Mount Ambrose and the surrounding area
Mount Ambrose is about 1 mile north-east of Redruth, in Cornwall. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 644 places across Cornwall.
Jobs in TR15 and TR16 work the same way as everywhere else we cover. From New Lane, Radnor Road and Boscarn Road or a nearby road, a technician can come to you. Nearby, we also work in Treskerby (1 mile east), Treleigh (1 mile west), Radnor (1 mile north), Redruth (1 mile south-west) and Busveal (1 mile south-east). Within a short drive, we also cover Truro (7 miles east), Newquay (13 miles north-east), Falmouth (9 miles south-east), Camborne (4 miles south-west), Helston (10 miles south) and Hayle (10 miles south-west).
Landmarks near Mount Ambrose
Around Mount Ambrose, we work in homes near Treleigh Community Primary School, Church of St Stephen and The Mount Ambrose Inn, among other places. For rail, the closest station is Redruth station, roughly 1 mile south-west. A little further out are Tolgus Tin (1.4 miles north-west) and Camborne Redruth Community Hospital (1.8 miles south-west). Green spaces nearby include St Agnes Beacon.
About our accreditations · Every repair comes with a one-year guarantee.
