Somerset · England
Bath Repair in Muchelney
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Muchelney, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that’s discoloured or lifting
What affects the price in Muchelney
Repairs from £95. You’ll know the full cost before booking. We look at:
- What the surface is made of
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- How easy the damage is to reach
We charge the same wherever you are, so there’s no premium for Muchelney. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
Upload a photo of the damage and one of the whole item, with your TA10 postcode, and we will come back with a fixed quote.
About our bath repair in Muchelney
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the next day. Typical jobs include impact holes in acrylic and hairline or through cracks in acrylic, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Every job is backed for twelve months in Muchelney and everywhere else. If something goes wrong with the work, we come back.
- Location
- Muchelney (TA10)
- County
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
What a repair can’t fix
In fairness, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Wear across the whole surface, which needs re-enamelling
If in doubt, send photos and we will say what we think.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Common questions in Muchelney
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Something went through my bath. Can it be fixed?
Normally. Send us a picture of the hole and one from under the bath if you can.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What happens next?
You will get a fixed quote back. There’s no obligation to book.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How long before I can use the bath?
Typically the following day. We confirm the time before we leave.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
Before we arrive
- Let the surface dry out before the visit
- Open a window if you can
- Point us to the nearest place to park
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Nearby places to Muchelney
Other services in Muchelney
Landlord and trade work in Muchelney
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
If you manage property in Muchelney, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Do you need bath repair in Muchelney?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
You may need us if you’ve spotted:
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Impact holes in acrylic
- A cracked acrylic bath
What your quote should include
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- What aftercare is recommended
Our work in Muchelney
Muchelney is about 9 miles north-west of Yeovil, in Somerset. Wherever you are in the TA10 postcode area, a technician comes to you. Muchelney is one of 640 places in Somerset where we work.
All of TA10 is covered. Streets in the area include Wetmoor Lane and Silver Street, all of which we cover. We also cover the places around Muchelney: Wagg (1 mile north), Whitecross (2 miles west), Drayton (2 miles west), Midelney (2 miles south-west) and Langport (2 miles north). We also work in nearby towns such as Taunton (13 miles west), Bridgwater (11 miles north-west), Yeovil (9 miles south-east), Chard (12 miles south-west), Wells (15 miles north-east) and Street (8 miles north).
Landmarks near Muchelney
Typical jobs here are in homes near Church of St Peter and St Paul and Huish Episcopi Academy, among other places. The countryside around Muchelney includes West Sedgemoor RSPB reserve.
About our accreditations · Every repair comes with a one-year guarantee.
