Somerset · England

Bath Repair for Langport homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Langport and across Somerset. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Langport

Bath repair at your home in Langport

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Whether it’s a chip where the taps sit and rust by the waste and overflow, we can help.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Where
Langport (TA10)
Area hub
Somerset
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

When to call us in Langport

Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.

These are the problems we are asked about most:

  • Snagging damage from a refit
  • A chipped rim or side
  • Rust by the waste and overflow
  • Hairline or through cracks in acrylic

Comparing quotes

  • How changes to the job are handled
  • Whether a trained technician does the job
  • Is the price fixed, and does it include VAT?
  • How soon you can use it again

10 questions to ask before you book

Aftercare tips

Aftercare is simple:

  • Get a dripping tap fixed promptly
  • Give the bath a quick rinse after use
  • Store metal items away from the bath
  • If an acrylic bath flexes, have its feet adjusted

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.

What we cannot put right

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Common questions in Langport

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Can you repair a crack in an acrylic bath?

Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Repair or replace in Langport?

Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why book with us

  • No need to remove anything
  • We come to you, anywhere in the UK
  • Colour-matched on site
  • A fixed quote before you book

Read our pricing and resurfacing vs replacement cost guide.

What bath repair costs

Prices start from £95. Prices are worked out job by job. What matters most is:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • How many items we do on one visit

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

How to get a fixed price

Phone photos are fine. Make sure they show:

  • What it’s made of, if you know
  • Where you are, by postcode
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale

Upload a photo of the damage and a wider shot of the entire item, with your TA10 postcode, and we’ll reply with a fixed price.

Our work in Langport

Langport is about 10 miles south-east of Bridgwater, in Somerset. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Langport is one of 640 places in Somerset where we work.

We work across the TA10 postcode area. Whether you live on Eastover, The Beeches and Garden City or a nearby road, we can come to you. Langport is on the A372 and A378, which makes it straightforward to reach. We also cover the places around Langport: Wearne (1 mile north), Pict's Hill (1 mile east), Wagg (1 mile east), Combe (1 mile north-west) and Muchelney (2 miles south). Larger places within reach include Taunton (12 miles west), Bridgwater (10 miles north-west), Yeovil (10 miles south-east), Chard (13 miles south-west), Burnham-on-Sea (15 miles north-west) and Wells (14 miles north-east).

Local landmarks in Langport

Typical jobs here are in homes near Huish Episcopi Primary School, The Black Swan Inn and Huish Episcopi Academy and the streets around them. Open spaces near Langport include West Sedgemoor RSPB reserve and Burrow Mump.

Map of Langport © OpenStreetMap contributors

How it works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Mention any earlier repairs or resurfacing
  • Make sure the area is dry

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.