Hampshire · England
Bath Repair in Murrell Green
We travel to Murrell Green for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- An old repair that has yellowed or come loose
- Snagging damage from a refit
About our bath repair in Murrell Green
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. Typical jobs include hairline or through cracks in acrylic and chips under the taps, across cast iron enamel, pressed steel enamel and whirlpool & spa baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Murrell Green (RG27)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Murrell Green questions
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I get a price for bath repair in Murrell Green?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
When can I have a bath again?
Normally by the following day, depending on the repair.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Landlord and trade work in Murrell Green
We work for landlords, letting agents and housing providers in Murrell Green as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Covering Murrell Green
Murrell Green is about 4 miles west of Fleet, in Hampshire. Wherever you are in the RG27 postcode area, we carry out the work at your property. Our repair technicians cover 683 places in Hampshire, from the larger towns to small villages. You can also see our page for London, about 39 miles away.
Every address in RG27 is covered. Neighbouring places we cover include West Green (1 mile north-east), Hook (1 mile west), Phoenix Green (1 mile east), Winchfield (1 mile east) and Hook Common (2 miles south-west). Within a short drive, we also cover Basingstoke (7 miles west), Farnborough (7 miles east), Fleet (4 miles east), Aldershot (8 miles east), Alton (10 miles south) and Yateley (6 miles north-east).
Landmarks near Murrell Green
Around Murrell Green, we work in homes near Hook Junior School and St John the Evangelist and the streets around them. The nearest railway station is Winchfield station, about 1.3 miles east. Nearby you will also find Odiham Castle (2.2 miles south-west) and Fleet Community Hospital (3.8 miles east). The countryside around Murrell Green includes Fleet Pond Nature Reserve and Tundry Hill.
Common problems we fix in Murrell Green
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Look out for any of the following:
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Rust spots around the plughole
- Impact holes in acrylic
Comparing quotes
- Aftercare advice
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Whether cleaning and preparation are in the price
Places near Murrell Green
Also in Murrell Green
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to mild cleaners and a soft cloth
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
The process
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take two to three hours for most chips, including clearing up.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Should you replace it?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No need to remove anything
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- Technicians who travel to you, UK-wide
Read our pricing or guide to resurfacing and replacement costs.
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Murrell Green
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
