Gloucestershire · England
Bath chip & crack repair in Naunton, Gloucestershire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Naunton and across Gloucestershire. Free, fixed quotes from your pictures.
- Repairs from £95
- A chip where the taps sit
- An old repair that has yellowed or come loose
How we handle bath repair in Naunton
A typical bath repair is a few hours’ work, and you can typically bathe again the day after. There’s no need to book a plumber or tiler, because the bath doesn’t move. We work on roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are cracks in an acrylic bath and impact holes in acrylic.
All our work comes with our one-year guarantee, wherever you are in Gloucestershire.
- Where
- Naunton (GL54)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How many items we do on one visit
- The material
- How many areas need work
- How hard the colour is to match
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- A photo taken from further back
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Naunton and the surrounding area
Naunton is about 10 miles east of Bishop's Cleeve, in Gloucestershire. We visit customers in Naunton and nearby villages, so nothing has to leave your home. Our technicians cover 470 places in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 39 miles away.
All of GL54 is covered, from the main roads to the quietest streets. If you’re just outside Naunton, we cover Guiting Power (2 miles north-west), Barton (2 miles north-west), Lower Slaughter (3 miles east), Bourton-on-the-Water (4 miles south-east) and Lower Swell (4 miles east). Within a short drive, we also cover Cheltenham (11 miles west), Tewkesbury (14 miles north-west), St Paul's (10 miles west), Cirencester (15 miles south), Lansdown (10 miles west) and Bishop's Cleeve (10 miles west).
What’s near Naunton
We visit homes around St Andrew's Parish Church and The Black Horse Inn, among other places. Nearby you’ll also find Moore Cottage Hospital (3.7 miles east) and Cotswold Motoring Museum (3.6 miles south-east).
How it works
We begin by going over the job with you. After that, protection goes down around the work area and we start. Allow a morning or an afternoon, and we’ll tell you if anything changes.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Ensure the area is dry
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Getting a price
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in Naunton, and we’ll come back with a fixed quote.
Related advice
Towns and villages near Naunton
What else we do in Naunton
What we are called out for in Naunton
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
The things customers typically mention when they call include:
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Rust by the waste and overflow
- A chipped rim or side
Questions to ask before booking
- If travel is included in the price
- How your room will be protected
- How to care for the finish
- How changes to the job are handled
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Questions from Naunton
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you come to Naunton?
Yes. We work across the UK and travel to Naunton. Send us photos for a fixed quote, or call 0345 017 0787.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Landlords, agents and businesses in Naunton
Landlords, letting agents and housing providers in Naunton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
What you get with us
- A year’s guarantee on all work
- Rooms protected and left tidy
- One price list for the whole UK
- Technicians who travel to you, UK-wide
See our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
