Hampshire · England
Bath chip & crack repair in New Alresford, Hampshire
Problem with your bath in New Alresford? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Snagging damage from a refit
Bath repair in New Alresford, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. If you are dealing with damage done while the bathroom was being fitted and rusty patches near the plughole, we can help, whatever the material.
You get a one-year guarantee, the same in New Alresford as everywhere else we work.
- Area
- New Alresford (SO24)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why book with us
- Nothing taken out or refitted
- One price list for the whole UK
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our pricing or bath cost comparison.
Do you need bath repair in New Alresford?
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
The most common problems we’re called about are:
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
Comparing quotes
- How the room is protected while they work
- What prep work is covered
- Whether a trained technician does the job
- How soon you can use it again
Looking after it afterwards
Looking after the surface is easy:
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
How it works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
How to prepare
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
Get a quote
Email us photos of the damage and a wider shot of the entire item, with your SO24 postcode, and we’ll come back with a fixed quote.
Read more
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Access to the area
- How much damage there is
- Whether old repairs or coatings need taking off
- The type of damage
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A close-up of the damage, in focus
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One picture of the entire bath
To get a price, send a couple of photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
New Alresford and nearby
New Alresford is about 7 miles east of Winchester, in Hampshire. Customers in New Alresford get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 683 towns and villages in Hampshire. Our jobs stretch from New Alresford to London (54 miles away).
All of SO24 is within our area. We regularly work on streets such as Station Road, Elm Road and Bramble Hill. Being close to the B3046 and B3047, New Alresford is simple for us to get to. If you are just outside New Alresford, we cover Bishop's Sutton (2 miles east), Gundleton (2 miles east), Cheriton (2 miles south), Hinton Ampner (3 miles south) and Bramdean (3 miles south-east). We also work in nearby towns such as Basingstoke (13 miles north), Winchester (7 miles west), Eastleigh (11 miles south-west), Horndean (14 miles south-east), Chandler's Ford (12 miles south-west) and Alton (9 miles north-east).
Landmarks near New Alresford
Around New Alresford, we work in homes near Church of St John the Baptist, The Running Horse Public House and Perins School. Further afield, we also cover the area around Barton Castle (4.3 miles north-east). The countryside around New Alresford includes Shutts Copse.
Also near New Alresford
Other services in New Alresford
New Alresford: your questions answered
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
What areas do you cover?
We work UK-wide, and that includes New Alresford. Prices do not change with location.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Cracks in acrylic we can’t reach from underneath
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Send us photos and we will tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
