Hampshire · England
Bath chip & crack repair in Bramdean, Hampshire
We travel to Bramdean for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Damage beneath the taps
Bath repair at your home in Bramdean
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Whether it’s a failed DIY repair that’s discoloured or lifting and chips along the edge of the bath, we can generally put it right, whatever the material.
You get a one-year guarantee, the same in Bramdean as everywhere else we work.
- Location
- Bramdean (SO24)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- How many areas need work
- How many items we do on one visit
- What kind of damage it is
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- One picture of the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Repairing versus replacing in Bramdean
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- No extra charge for your area
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Read our full price list or guide to resurfacing and replacement costs.
FAQs for Bramdean
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Which areas do you work in?
We work UK-wide, so Bramdean is covered. Our prices are the same everywhere.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Are there extra charges for Bramdean?
We do not add a call-out fee. The fixed quote covers the visit and the work.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
About Bramdean
Bramdean is about 8 miles east of Winchester, in Hampshire. We visit homes and businesses in Bramdean and the surrounding area, so nothing has to leave your home. We work in all 683 towns and villages across Hampshire. You can also see our page for London, about 54 miles away.
All of SO24 is covered, from the main roads to the quietest streets. Streets in the area include Wood Lane, Woodlane Close and The Spinney, and we cover them all. We also travel to Hinton Ampner (1 mile west), Cheriton (2 miles west), Bishop's Sutton (2 miles north), Beauworth (3 miles south-west) and Warnford (3 miles south). Further out, we also cover Basingstoke (15 miles north), Winchester (8 miles west), Havant (14 miles south-east), Eastleigh (11 miles south-west), Fareham (14 miles south) and Horndean (11 miles south-east).
What’s near Bramdean
Locally, our jobs take us to homes close to Church of St Simon and St Jude and The Fox Inn, among other places. The countryside around Bramdean includes Shutts Copse and Beacon Hill.
Common problems we fix in Bramdean
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
- Chips on the rim or sides
What your quote should include
- Who will actually do the work
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
Places near Bramdean
More services for Bramdean
How to look after the repair
Aftercare is simple:
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Don’t scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Open a window if you can
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
