Aberdeenshire · Scotland
Bath Repair in New Deer
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in New Deer and across Aberdeenshire. Send photos for a free, fixed quote.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
New Deer and nearby
New Deer is about 13 miles south-west of Fraserburgh, in Aberdeenshire. From the centre of New Deer to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. New Deer is one of 161 towns and villages in Aberdeenshire where we work.
Jobs in AB53 work the same way as everywhere else we cover. You will find streets such as Main Street, High Street and Fordyce Avenue, all of which we cover. We also cover the places around New Deer: Turfhill (1 mile west), Maud (2 miles east), Auchnagatt (4 miles south-east), New Pitsligo (5 miles north) and Cuminestown (6 miles west). Larger places within reach include Peterhead (15 miles east), Fraserburgh (13 miles north-east), Ellon (11 miles south-east), Turriff (10 miles west), Roanheads (15 miles east) and Clerkhill (15 miles east). Some remote addresses need extra planning, so call us to arrange it.
Near you in New Deer
Around New Deer, we work in homes near New Deer Parish Church and the streets around them. Other landmarks nearby include Maud Hospital (2.5 miles east) and Maud Junction railway station (2.5 miles east).
Bath repair at your home in New Deer
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you are dealing with a chip where the taps sit and rust spots around the plughole, we can help, on pressed steel enamel, whirlpool & spa baths and cast iron enamel alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- New Deer (AB53)
- Region
- Aberdeenshire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
Before booking, it’s worth knowing the limits:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we’ll say what we think.
Materials we work on in New Deer
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Nearby places to New Deer
What else we do in New Deer
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Work done at your home or business
- Every repair guaranteed for a year
- We will tell you if it’s not worth repairing
- A fixed quote before booking
Read our full price list and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Common problems we fix in New Deer
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
These are the problems we’re asked about most:
- A hole punched through by something heavy
- A kit repair that didn’t last
- Deep scratches in acrylic
- A chipped rim or side
What your quote should include
- Aftercare advice
- Whether the colour is mixed to match
- How the room is protected while they work
- Whether there are any call-out or travel charges
What bath repair costs
Repairs from £95. There is no area surcharge for New Deer. The price reflects:
- The type of damage
- The material
- Previous DIY repairs that have to come out
- How many areas need work
We charge the same wherever you are, so there’s no premium for New Deer. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- What it’s made of, if you know
- One picture of the entire bath
- Natural light rather than flash
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
New Deer questions
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How much does bath repair cost in New Deer?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
How long does the repair take to cure?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Open a window if you can
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
