Aberdeenshire · Scotland

Bath chip & crack repair in Maud, Aberdeenshire

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Maud. Send photos for a free, fixed quote.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Maud

Signs you need bath repair in Maud

A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.

Keep an eye out for any of the following:

  • Rust spots around the plughole
  • Chips along the edge of the bath
  • Holes from dropped items
  • A failed DIY repair that is discoloured or lifting

Questions to ask before you book

  • What happens if the damage is worse than the photos show
  • What preparation is included
  • How long the guarantee is and what it covers
  • What aftercare is recommended

How to compare quotes

Bath repair in Maud without replacing anything

A typical bath repair is a few hours’ work, and you can typically bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include a hole punched through by something heavy and a kit repair that didn’t last, across roll-top & freestanding, whirlpool & spa baths and acrylic.

You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Before and after: a chipped, rust-stained bath around the plughole
Area
Maud (AB42)
Region
Aberdeenshire
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

How to look after the repair

Once the work has cured, treat it gently:

  • Have new chips seen to early
  • Keep metal cans and razors off the surface
  • Give the bath a quick rinse after use
  • A dripping tap stains enamel, so fix it early

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area

Ask for a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Related advice

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • A bath worn all over, where resurfacing makes more sense
  • Flexing caused by a failed cradle or loose feet
  • Acrylic cracks with no access behind them

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Landlord and trade work in Maud

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

About Maud

Maud is about 12 miles south of Fraserburgh, in Aberdeenshire. Our repair technicians come to clients in Maud, so you don’t need to take anything anywhere. We cover all 161 towns and villages in Aberdeenshire, from the larger towns to small villages.

We work across AB42. Local streets include Market Street, School Road and Deer Road. If you’re just outside Maud, we cover New Deer (2 miles west), Turfhill (3 miles west), Old Deer (3 miles east), Stuartfield (3 miles east) and Auchnagatt (4 miles south). Within a short drive, we also cover Peterhead (12 miles east), Fraserburgh (12 miles north), Ellon (11 miles south), Turriff (12 miles west), Roanheads (13 miles east) and Clerkhill (12 miles east).

Near you in Maud

In Maud, that means homes near Maud and the streets around them. Nearby you will also find Maud Junction railway station (less than half a mile east) and Brucklay Castle (1.6 miles north-west). Green spaces nearby include Pitfour Lake.

Map of Maud © OpenStreetMap contributors

Repair or replace: which is better?

Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Maud

  • Repair technicians who travel to you, UK-wide
  • No need to remove anything
  • Straight answers about what a repair can do
  • One visit for most repairs

See our pricing or guide to resurfacing and replacement costs.

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

FAQs for Maud

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we’ll plan for it.

Can rust on a bath be repaired?

Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Is there any odour?

Expect a mild smell while we are working.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Is repairing better than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

How we price bath repair

Prices start from £95. There is no area surcharge for Maud. What changes the price is:

  • How much damage there is
  • Doing more than one item at once
  • Access to the area
  • What the surface is made of

A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • One picture of the whole bath
  • A coin or ruler next to the damage for scale

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say straight away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.