Worcestershire · England
Bath Repair for Newnham Bridge homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Newnham Bridge and across Worcestershire. Free, fixed quotes from your photos.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
How we price bath repair
Prices start from £95. There is no area surcharge for Newnham Bridge. The price reflects:
- The type of damage
- The colour and finish to match
- How much damage there is
- The material
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Any details about the material
- Natural light rather than flash
- A close-up of the damage, in focus
- Any earlier repairs or coatings
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bath repair at your home in Newnham Bridge
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on whirlpool & spa baths, cast iron enamel and acrylic, and common reasons people contact us are chips caused by builders and rusty patches near the plughole.
You get a one-year guarantee, the same in Newnham Bridge as everywhere else we work.
- Area
- Newnham Bridge (WR15)
- Region
- Worcestershire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Newnham Bridge
Also in Newnham Bridge
Keeping it looking good
How the surface is treated afterwards matters:
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Common problems we fix in Newnham Bridge
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Contact us if you’ve noticed:
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
- Deep scratches in acrylic
- Snagging damage from a refit
Comparing quotes
- If travel is included in the price
- What the guarantee covers, and for how long
- When it can be used again
- Whether the price is fixed and includes VAT
Newnham Bridge and nearby
Newnham Bridge is about 10 miles west of Stourport-on-Severn, in Worcestershire. Across the WR15 area, we come to you. Our technicians cover 376 places across Worcestershire. You can also see our page for Birmingham, about 29 miles away.
We work across WR15. You will find streets such as Tavern Lane, Station Close and Wyrebrook Orchard. We also cover the places around Newnham Bridge: Upper Rochford (1 mile south), Spurtree (2 miles west), Malvern Hills (3 miles west), Tenbury Wells (3 miles west) and Knowle (4 miles north-west). Larger places within reach include Kidderminster (13 miles east), Stourport-on-Severn (10 miles east), Bewdley (10 miles north-east), Henwick (15 miles south-east), Dines Green (15 miles south-east) and Comberton (13 miles east).
What’s near Newnham Bridge
In Newnham Bridge, that means homes near Church of St Michael, among other places. Other landmarks nearby include Eastham Bridge mound (1.2 miles east). Open spaces near Newnham Bridge include Hunthouse Wood and Clee Hill.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Newnham Bridge
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Newnham Bridge: your questions answered
Do you cover Newnham Bridge?
We do. We send a technician to Newnham Bridge for every job, with no extra charge for travel.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What areas do you cover?
We work UK-wide, so Newnham Bridge is covered. Our prices are the same everywhere.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
How do I get a price for bath repair in Newnham Bridge?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colour mixed on the day to match
- No extra charge for your area
- Rooms protected and left tidy
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
