Wiltshire · England
Bath chip & crack repair in Newton, Wiltshire
Bath repair for Newton, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Chips under the taps
- A hole punched through by something heavy
Bath repair in Newton, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re often asked to fix a hole punched through by something heavy and a kit repair that didn’t last, on roll-top & freestanding, pressed steel enamel and acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Newton (SP5)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Newton: your questions answered
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Newton.
Are there extra charges for Newton?
No. Our quotes include travel, with the same prices everywhere we work.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Towns and villages near Newton
Also in Newton
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- Everything repaired in place
- One visit for most repairs
- One price list for the whole UK
Read our full price list and bath cost comparison.
Covering Newton
Newton is about 8 miles south-east of Salisbury, in Wiltshire. Clients in Newton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 425 towns and villages in Wiltshire, from the larger towns to small villages. We work right across the region, from Newton to London (about 76 miles away).
All of SP5 is covered, from the main roads to the quietest streets. Nearby, we also work in Whiteparish (1 mile north-east), Cowesfield Gate (2 miles east), West Dean (3 miles north-east), East Dean (3 miles north-east) and East Grimstead (3 miles north). We also work in nearby towns such as Salisbury (8 miles north-west), Amesbury (12 miles north), Bugmore (7 miles north-west), Milford (7 miles north-west), Old Sarum (9 miles north-west) and Harnham (7 miles north-west).
Around Newton
Typical jobs here are in homes near The Fountain Inn, Whiteparish All Saints Church of England Primary School and Church of All Saints, among other places. For rail, the closest station is Dean station, roughly 2.9 miles north-east. Further afield, we also cover the area around Downton Moot Close (3.6 miles west).
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Get a quote
If you’re in Newton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Landlord and trade work in Newton
We work for landlords, letting agents and housing providers in Newton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How we price bath repair
Repairs from £95. You will not pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- What the surface is made of
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A picture taken from further back
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Signs you need bath repair in Newton
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Get in touch if you’ve noticed any of these:
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
Questions to ask before you book
- How your room will be protected
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How long it needs to cure
Aftercare tips
It’s all simple stuff:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
There’s nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
