Derbyshire · England
Bath chip & crack repair in Norbury, Derbyshire
Damaged bath in Norbury? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- Rust spots around the plughole
Bath repair at your home in Norbury
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on whirlpool & spa baths, cast iron enamel and acrylic, and common reasons people get in touch are a chipped rim or side and a cracked acrylic bath.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Norbury (DE6)
- County
- Derbyshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
What you get with us
- Rooms protected and left tidy
- Same prices wherever you are
- One visit for most repairs
- Technicians who travel to you, UK-wide
Read our pricing or resurfacing vs replacement cost guide.
Do you need bath repair in Norbury?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
If you can see any of these, send us a photo:
- A chip where the taps sit
- Impact holes in acrylic
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
Comparing quotes
- Who turns up on the day
- How long it needs to cure
- Whether the price covers travel
- What protection goes down before work starts
Other services in Norbury
About Norbury
Norbury is about 6 miles north-east of Uttoxeter, in Derbyshire. Whether you’re in the middle of Norbury or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 532 places in Derbyshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 35 miles away.
Our repair technicians cover all of DE6 and the streets around it. Other places close to Norbury include Roston (1 mile south-east), Ellastone (1 mile north), Prestwood (1 mile west), Denstone (2 miles south-west) and Rocester (2 miles south-west). Further out, we also cover Belper (15 miles east), Ashbourne (4 miles north-east), Hilton (11 miles south-east), Wirksworth (12 miles north-east), Duffield (14 miles east) and Etwall (11 miles south-east).
Local landmarks in Norbury
Our customers here include homes close to St Mary and St Barlock's Church, The Duncombe Arms and Norbury CofE Primary School. Well-known places in the area include Alton Castle (3.1 miles west) and St Oswalds Hospital (4.1 miles north-east). Open spaces near Norbury include Thorswood.
What bath repair costs
Repairs from £95. We price every job individually. What matters most is:
- What kind of damage it is
- How much damage there is
- Where the damage is and how we get to it
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
When you take your pictures, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Cover the bath during DIY or decorating
- Check that an acrylic bath does not move when you stand in it
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Norbury
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Norbury questions
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Are there extra charges for Norbury?
Travel is included in the price, with the same prices everywhere we work.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
