Derbyshire · England
Bath Repair for Etwall homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Etwall. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips along the edge of the bath
- Rust by the waste and overflow
Bath repair at your home in Etwall
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you’re dealing with holes from dropped items and rust by the waste and overflow, we can generally put it right, on acrylic, cast iron enamel and roll-top & freestanding alike.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Etwall (DE65)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Etwall
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Etwall.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What areas do you cover?
Everywhere in the UK, Etwall included. Travel is included in the price.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How it works
We agree an arrival time beforehand. On site, it takes two to three hours for most chips for most jobs. We leave the room clean.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Ensure the room can be ventilated
- Clear the area around the damage
- Keep children and pets away from the room on the day
Get a quote
Email us pictures of the damage and one of the entire item, and tell us you are in Etwall, and we will reply with a fixed quote.
Read more
Looking after it afterwards
To keep it looking its best:
- Do not leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
When to call us in Etwall
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Most people contact us after spotting one of these:
- Scuffs and scratches in the surface
- Damage beneath the taps
- Rust by the waste and overflow
- Chips on the rim or sides
Before you book anyone
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Who turns up on the day
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
More services for Etwall
How we price bath repair
Repairs from £95. We charge the same across the UK, including Etwall. What changes the price is:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What kind of damage it is
- Access to the area
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A photo taken from further back
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Repair or replace in Etwall?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Why Etwall clients choose us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
Read our pricing or bath cost comparison.
Covering Etwall
Etwall is about 5 miles north of Burton upon Trent, in Derbyshire. We travel to homes and businesses in Etwall and the surrounding area, so nothing has to leave your home. Etwall is one of 532 places in Derbyshire we cover. You can also see our page for Birmingham, about 31 miles away.
All of DE65 is within our area. Local streets include Main Street, Belfield Road and Heathfield Avenue, all of which we cover. If you’re just outside Etwall, we cover Burnaston (1 mile north-east), Findern (2 miles east), Willington (2 miles south-east), Stenson (4 miles east) and Newton Solney (4 miles south). Further out, we also cover Swadlincote (7 miles south), Ilkeston (14 miles north-east), Long Eaton (13 miles east), Belper (11 miles north-east), Heanor (14 miles north-east) and Ripley (14 miles north-east).
Near you in Etwall
We visit homes around John Port Spencer Academy, Church of St Helen and Etwall Primary School. The nearest railway station is Willington station, roughly 2.4 miles south-east. Well-known places in the area include Etwall Hospital (less than half a mile north-west) and Repton School Museum (3.4 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
