Gloucestershire · England
Bath chip & crack repair in Norton, Gloucestershire
Bath repair in Norton without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
Bath repair in Norton without replacing anything
A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you are dealing with a cracked acrylic bath and chips caused by builders, we can help, whatever the material.
You get a one-year guarantee, the same in Norton as everywhere else we work.
- Location
- Norton (GL2)
- Region
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The colour and finish to match
- How many areas need work
- The material
- Previous DIY repairs that have to come out
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Most jobs done in one visit
- No extra charge for your area
See our prices page or bath cost comparison.
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Looking after it afterwards
Looking after the surface is easy:
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours, depending on the damage for most jobs. We leave the room clean and ready to use once it has cured.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
Our work in Norton
Norton is about 5 miles north of Gloucester, in Gloucestershire. Jobs in Norton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Norton is one of 470 towns and villages in Gloucestershire where we work. Our nearest city page is Birmingham, about 41 miles away.
Here we cover the GL2 postcode area. We regularly work on streets such as Lime Close, Wainlode Lane and Bramble Close and the roads around them. If you are just outside Norton, we cover Bishop's Norton (1 mile north-west), Wallsworth (1 mile south-west), Sandhurst (2 miles south-west), Lower Apperley (2 miles north) and Apperley (3 miles north). Larger places within reach include Cheltenham (6 miles east), Gloucester (5 miles south), Stroud (12 miles south), Tewkesbury (6 miles north-east), St Paul's (6 miles east) and Lansdown (6 miles east).
What’s near Norton
Around Norton, we work in homes near Church of St Mary and Norton Church of England Primary School. The closest station to Norton is Gloucester station, about 3.7 miles south of the centre. Well-known places in the area include Wotton Lawn Hospital (3.4 miles south) and Gloucester Castle (4 miles south-west). Not far away are Lassington Wood and Chosen Hill.
Nearby places to Norton
Also in Norton
FAQs for Norton
Are there extra charges for Norton?
We do not add a call-out fee. Your fixed price includes everything.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you cover the entire of Gloucestershire?
All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you come to Norton?
We do. Repair technicians travel to Norton from across the region, with no extra charge for travel.
How long before I can use the bath?
Normally within a day, though it depends on what we’ve done.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
When to call us in Norton
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Signs it’s time to call us include:
- Deep scratches in acrylic
- Chips under the taps
- Chips on the rim or sides
- Rust by the waste and overflow
Before booking anyone
- How soon you can use it again
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
