Swansea · Wales
Bath Repair for Langland homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Langland. Send photos for a free, fixed quote.
- Repairs from £95
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
Bath repair in Langland, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. If you are dealing with hairline or through cracks in acrylic and snagging damage from a refit, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Langland (SA3)
- Region
- Swansea
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
See our pricing and resurfacing vs replacement cost guide.
Signs you need bath repair in Langland
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Most people get in touch when they notice one of these:
- Chips caused by builders
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Impact holes in acrylic
What to look for in a quote
- Whether there are any call-out or travel charges
- What happens if they find more damage
- When it can be used again
- What aftercare is recommended
Langland and the surrounding area
Langland is about 4 miles south-west of Uplands, in Swansea. Customers in Langland get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Langland is one of 153 towns and villages in Swansea where we work.
Here we cover the SA3 postcode area. Whether you live on Slade Road, Newton Road and King's Road or a nearby road, a technician can come to you. Close by, we cover Oystermouth (1 mile north-east), Newton (1 mile north-west), Norton (1 mile north), West Cross (1 mile north) and Caswell (1 mile west). Within a short drive, we also cover Swansea (5 miles north-east), Castle (5 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (7 miles north) and Dyfaty (5 miles north-east).
What’s near Langland
Around Langland, we work in homes near Tabernacle United Reformed Church, Newton Primary School and Harbour Winds Hotel. For rail, the closest station is Swansea station, about 4.9 miles north-east of the centre. Nearby you will also find Oystermouth Castle (0.6 miles north-east) and Singleton Hospital (3 miles north). Not far away are Colts Hill and Bishop's Wood.
Landlords, agents and businesses in Langland
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Places near Langland
More services for Langland
Questions from Langland
How long before I can use the bath?
Normally the following day. We confirm the time before we leave.
How do I get a price for bath repair in Langland?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can a cracked acrylic bath be fixed?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Whether we combine several jobs
- How many areas need work
The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Any details about the material
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Honest limits
We’d rather lose a job than do one that won’t last, so these are the limits:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Langland
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, depending on the damage, including clearing up.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the next day, the bath is ready to use.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
- Point us to the nearest place to park
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
