Devon · England

Bath chip & crack repair in Oakfordbridge, Devon

Our repair technicians come to Oakfordbridge for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Oakfordbridge

Prices and what affects them

Prices start from £95. You will know the full cost before you book. We look at:

  • How easy the damage is to reach
  • The material and finish
  • Whether old repairs or coatings need taking off
  • How many areas need work

The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • One sharp close-up of the damage
  • Natural light rather than flash

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

How we handle bath repair in Oakfordbridge

A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. If you’re dealing with a chipped rim or side and hairline or through cracks in acrylic, we can usually put it right, whatever the material.

All our work is covered by our one-year guarantee, wherever you are in Devon.

Area
Oakfordbridge (EX16)
Region
Devon
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Common problems we fix in Oakfordbridge

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.

Get in touch if you’ve noticed any of these:

  • Chips caused by builders
  • Chips along the edge of the bath
  • Hairline or through cracks in acrylic
  • A failed DIY repair that’s discoloured or lifting

Questions to ask before booking

  • Aftercare advice
  • Whether there are any call-out or travel charges
  • How your room will be protected
  • How long it needs to cure

10 questions to ask before booking

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Repair or replace in Oakfordbridge?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures

Take a look at our full price list or bath cost comparison.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair won’t do:

  • Acrylic cracks with no access behind them
  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Oakfordbridge

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

Oakfordbridge and the surrounding area

Oakfordbridge is about 6 miles north-west of Tiverton, in Devon. Our repair technicians come to customers in Oakfordbridge and nearby villages, so nothing has to leave your home. We cover 586 places in Devon, from the larger towns to small villages.

Here we cover the EX16 postcode area. Other places close to Oakfordbridge include Oakford (1 mile south-west), Bampton (2 miles east), Brushford (2 miles north), Cove (3 miles south-east) and Morebath (3 miles north-east). Larger places within reach include Tiverton (6 miles south-east), Cullompton (11 miles south-east), Crediton (14 miles south), South Molton (13 miles west), Willand (10 miles south-east) and Uffculme (11 miles south-east).

Landmarks near Oakfordbridge

Typical jobs here are in homes near The Red Lion Public House and Church of St Peter, among other places. Well-known places in the area include Tiverton and District Hospital (5.7 miles south). For a walk, there is Rackenford and Knowstone Moors.

Map of Oakfordbridge © OpenStreetMap contributors

Looking after it afterwards

Once the work has cured, treat it gently:

  • Protect the bath with a towel when doing jobs nearby
  • Keep metal cans and razors off the surface
  • Keep abrasive pads and gritty cleaners away from the bath
  • If an acrylic bath flexes, have its feet adjusted

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

What happens on the day

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let us know about parking or access
  • Point us to the nearest place to park
  • Let us know which floor the room is on

Get a quote

To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Get a fixed quote

Advice

FAQs for Oakfordbridge

Can you repair several things at once?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first, so let us know about it.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

What happens once I’ve sent photos?

You’ll get a fixed quote back, plus dates. There is no obligation to book.

Do you cover the whole of Devon?

We work UK-wide, and that includes Oakfordbridge. Prices do not change with location.

Landlords, agents and businesses in Oakfordbridge

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Oakfordbridge as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.