Northumberland · England
Bath chip & crack repair in Oakwood, Northumberland
Bath repair for Oakwood, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Impact holes in acrylic
- Rusty patches near the plughole
Bath repair in Oakwood, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. Typical jobs include a failed DIY repair that’s discoloured or lifting and scratches you can feel with a fingernail, on acrylic, roll-top & freestanding and cast iron enamel.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Oakwood (NE46)
- County
- Northumberland
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Oakwood
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
People usually call us when they notice something like this:
- Chips caused by builders
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- Damage beneath the taps
Before you book anyone
- How your room will be protected
- The length of the guarantee and what it covers
- How changes to the job are handled
- How to care for the finish
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we can’t put right
Some jobs are not right for a repair, for example:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Keeping it looking good
To keep it looking its best for years:
- Don’t leave a fresh chip for long
- A dripping tap stains enamel, so fix it early
- Do not scrub with anything abrasive
- Check that an acrylic bath does not move when you stand in it
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Access to the area
- What the surface is made of
- What kind of damage it is
- Whether we combine several jobs
The price reflects the work involved, not where you live. The full price is agreed before booking.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
More services for Oakwood
FAQs for Oakwood
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one.
Repairing versus replacing in Oakwood
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Oakwood clients choose us
- We leave the room as we found it
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
See our pricing or resurfacing vs replacement cost guide.
Where we work around Oakwood
Oakwood is about 13 miles north-west of Consett, in Northumberland. Anywhere in NE46, we carry out the work at your property. We cover all 189 towns and villages in Northumberland, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 17 miles away.
Here we cover the NE46 postcode area. Local streets include East Oakwood and Fairfield Crescent, all of which we cover. If you’re just outside Oakwood, we cover Bridge End (1 mile south-west), Acomb (1 mile west), Hexham (2 miles south-west), Corbridge (3 miles east) and Wall (3 miles north-west). Within a short drive, we also cover Prudhoe (9 miles east), Ponteland (13 miles east), Haltwhistle (15 miles west), Haydon Bridge (7 miles west), Wylam (10 miles east) and Stocksfield (8 miles south-east).
Local landmarks in Oakwood
Around Oakwood, we work in homes near Church of St John of Beverley, Beaufront First School and Hexham Middle School and the streets around them. The nearest railway station is Hexham station, about 1.1 miles south-west of the centre. A little further out are Hexham General Hospital (1.4 miles south-west) and Beaufront Castle (0.8 miles east).
- Parks and local facilities nearby include Hexham Urban District (1.5 miles south-west)
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
