Wiltshire · England
Bath chip & crack repair in Oare, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Oare, carried out at your home and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Damage done while the bathroom was being fitted
How we price bath repair
Repairs from £95. There’s no area surcharge for Oare. The price reflects:
- What the surface is made of
- How many items we do on one visit
- Access to the area
- The colour and finish to match
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- The material, if you know it
- A coin beside the damage so we can judge size
For a price in Oare, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our bath repair in Oare
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Common call-outs are for rust spots around the plughole and deep scratches in acrylic, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Oare (SN8)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Oare
Oare is about 9 miles east of Devizes, in Wiltshire. Our technicians come to homes and businesses in Oare and nearby villages, so nothing has to leave your home. We work in 425 places across Wiltshire, from the larger towns to small villages. You can also see our page for London, about 73 miles away.
Our visits in SN8 are booked in the same way as anywhere else. From Pound Lane and Rudge Lane or a nearby road, a technician can come to you. Close by, we cover Wilcot (2 miles south-west), Pewsey (2 miles south), Milton Lilbourne (2 miles south-east), Wootton Rivers (2 miles east) and Manningford Abbots (3 miles south-west). Further out, we also cover Calne (11 miles north-west), Devizes (9 miles west), Melksham (15 miles west), Amesbury (14 miles south), Marlborough (4 miles north-east) and Bulford (12 miles south).
Around Oare
Typical jobs here are in homes near Pewsey Vale School, Church of the Holy Trinity and The White Hart pub, among other places. The closest station to Oare is Pewsey station, about 1.6 miles south. Further afield, we also cover the area around Pewsey Heritage Centre (1.8 miles south) and Savernake Hospital (4.5 miles north-east). Green spaces nearby include Knap Hill.
Landlord and trade work in Oare
For anyone letting property in or around Oare, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
FAQs for Oare
Do you cover the whole of Wiltshire?
We cover the entire UK, including Oare and the rest of Wiltshire. Just include your postcode and we will confirm dates.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Are there extra charges for Oare?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Put a towel in the bath if you’re working above it
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Clean with warm water and a mild detergent
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Work done at your home or business
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
Read our full price list and bath cost comparison.
More services for Oare
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It usually takes a few hours, and you can get on with other things while we’re there.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Keep a parking space free if you can
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
What we are called out for in Oare
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Common reasons people in Oare contact us are:
- Snagging damage from a refit
- A cracked acrylic bath
- Deep scratches in acrylic
- Rusty patches near the plughole
What your quote should include
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How your room will be protected
- If travel is included in the price
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
