Bridgend · Wales
Bath Repair for Ogmore-by-Sea homes
Problem with your bath in Ogmore-by-Sea? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
Landlords, agents and businesses in Ogmore-by-Sea
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How we handle bath repair in Ogmore-by-Sea
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath doesn’t move. Common call-outs are for snagging damage from a refit and an old repair that has yellowed or come loose, on whirlpool & spa baths, acrylic and cast iron enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Ogmore-by-Sea (CF32)
- Area hub
- Bridgend
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Ogmore-by-Sea customers choose us
- We’ll tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- Fixed prices from your photos
Take a look at our pricing and resurfacing vs replacement cost guide.
When to call us in Ogmore-by-Sea
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
If you can see any of these, send us a photo:
- Rust spots around the plughole
- Chips caused by builders
- Chips along the edge of the bath
- A cracked acrylic bath
What to look for in a quote
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Who will actually do the work
Your questions about bath repair in Ogmore-by-Sea
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Also near Ogmore-by-Sea
More services for Ogmore-by-Sea
Prices and what affects them
Prices start from £95. There is no area surcharge for Ogmore-by-Sea. The price reflects:
- Previous DIY repairs that have to come out
- Access to the area
- Unusual colours or finishes
- Whether we combine several jobs
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Covering Ogmore-by-Sea
Ogmore-by-Sea (Welsh: Aberogwr) is about 3 miles south-east of Porthcawl, in Bridgend. Anywhere in CF32, we come to you. Ogmore-by-Sea is one of 91 places in Bridgend we cover.
We work across CF32. You will find streets such as Crompton Way, Slon Lane and Church Close. Nearby, we also work in Southerndown (1 mile south-east), Ogmore (2 miles north-east), St Brides Major (2 miles east), Merthyr Mawr (2 miles north-east) and Pitcot (2 miles east). Larger places within reach include Bridgend (4 miles north-east), Maesteg (10 miles north), Porthcawl (3 miles north-west), Newcastle Higher (3 miles north-east), Ynysawdre (6 miles north) and Pencoed (7 miles north-east).
What’s near Ogmore-by-Sea
Locally, our jobs take us to homes close to Craig-Yr-Eos Hotel and the streets around them. For rail, the closest station is Bridgend station, about 3.9 miles north-east of the centre. Other landmarks nearby include Candleston Castle (1.4 miles north) and Porthcawl Museum (3.3 miles west). The countryside around Ogmore-by-Sea includes Pwll y Waun and Beacons Down.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Let us know which floor the room is on
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
- Get any new chip repaired before it rusts
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
