Nottinghamshire · England
Bath Repair in Oxton Hill
Local bath repair for Oxton Hill: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
Bath repair at your home in Oxton Hill
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. Our repair technicians work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most often call us about rust spots around the plughole and a hole punched through by something heavy.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Oxton Hill (NG25)
- Area hub
- Nottinghamshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Keeping it looking good
To keep it looking its best for years:
- Stick to mild cleaners and a soft cloth
- Store metal items away from the bath
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the following day, the bath is ready to use.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Getting a price
Most clients in Oxton Hill get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
What affects the price in Oxton Hill
Repairs from £95. You won’t pay by the hour. The price depends on:
- The material
- How many items we do on one visit
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Oxton Hill, and we will reply with a fixed quote.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Colour mixed on the day to match
- No need to remove anything
Read our full price list and resurfacing vs replacement cost guide.
Places near Oxton Hill
Other services in Oxton Hill
Signs you need bath repair in Oxton Hill
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Common reasons people in Oxton Hill contact us include:
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
- Chips under the taps
- Chips on the rim or sides
What to look for in a quote
- If travel is included in the price
- Whether cleaning and preparation are in the price
- How the colour is matched
- Who turns up on the day
Questions from Oxton Hill
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Work for landlords and builders
For anyone letting property in or around Oxton Hill, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Oxton Hill and the surrounding area
Oxton Hill is about 6 miles north-east of Arnold, in Nottinghamshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Oxton Hill is one of 329 towns and villages in Nottinghamshire we cover. We work right across the region, from Oxton Hill to Birmingham (about 54 miles away).
We work across the NG25 postcode area. Close by, we cover Oxton (1 mile west), Epperstone (2 miles south), Calverton (3 miles south-west), Edingley (3 miles north-east) and Woodborough (3 miles south). We also work in nearby towns such as Mansfield (9 miles north-west), Beeston (13 miles south-west), Carlton (7 miles south), Sutton in Ashfield (10 miles north-west), Hucknall (7 miles west) and Newark-on-Trent (10 miles east).
Local landmarks in Oxton Hill
Locally, our jobs take us to homes close to St Peter & St Paul's Church, among other places. The closest station to Oxton Hill is Thurgarton station, roughly 3.8 miles south-east. Other landmarks nearby include Lowdham Motte (3.5 miles south) and Calverton Folk Museum (2.6 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
