Nottingham · England

Bath chip & crack repair in Arnold, Nottingham

Bath repair in Arnold without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Snagging damage from a refit
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Arnold?

Landlord and trade work in Arnold

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Bath repair at your home in Arnold

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We are often asked to fix chips on the rim or sides and chips caused by builders, in pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.

Every repair comes with a one-year guarantee, wherever you are in Nottingham.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Arnold (NG5, NG3)
Area hub
Nottingham
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

The process

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage from start to finish. Before we go, we will explain how long to leave it and how to care for it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the next day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children

Get a quote

For a price in Arnold, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Do you need bath repair in Arnold?

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Typical reasons for a call-out include:

  • Damage done while the bathroom was being fitted
  • Scuffs and scratches in the surface
  • Impact holes in acrylic
  • Rust spots around the plughole

What to look for in a quote

  • Aftercare advice
  • What prep work is covered
  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers

Choosing a repair company

Arnold and nearby

Arnold is about 3 miles north-east of Nottingham, in Nottingham. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 51 places across Nottingham. You can also see our page for Birmingham, about 49 miles away.

All of NG5 and NG3 is within our area. Local streets include High Street, High Street Avenue and Glendale Gardens, and we cover them all. Being close to the A60 and B684, Arnold is simple for us to get to. We also cover the places around Arnold: Daybrook (1 mile west), Red Hill (1 mile north), Warren Hill (2 miles north-west), Top Valley (2 miles west) and Rise Park (2 miles west). Larger places within reach include Nottingham (3 miles south-west), Bulwell (3 miles west), Sneinton (3 miles south), St Ann's (3 miles south), Clifton (7 miles south) and The Park Estate (4 miles south-west). Arnold is among the bigger towns we cover in Nottingham.

Around Arnold

Locally, our jobs take us to homes close to Woodthorpe Grange Park, Arnold View Primary School and St. Mary's Church. Other local landmarks include The Ernehale pub (less than half a mile west) and Arnold Hill Academy (less than half a mile south-east). The closest station to Arnold is Carlton station, roughly 3 miles south-east. Other landmarks nearby include Mapperley Hospital (1.4 miles south) and South Nottinghamshire Hussars Museum (3 miles west). Open spaces near Arnold include Colwick Woods.

Map of Arnold © OpenStreetMap contributors

Honest limits

We will not take on work that won’t last, so these are the limits:

  • A bath worn all over, where resurfacing makes more sense
  • A bath that moves underfoot, until its support is fixed
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Arnold

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Your questions about bath repair in Arnold

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed price includes everything.

What happens once I’ve sent photos?

You’ll get a fixed quote back, plus dates. You’re under no obligation.

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can you repair a hole in a bath?

Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Prices and what affects them

Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:

  • How easy the damage is to reach
  • The size and number of damaged areas
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Send pictures for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • A wider photo showing the entire bath

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.

Should you replace it?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. We charge the same wherever you are, with no extra for Arnold. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • One-year guarantee on every repair
  • Most jobs done in one visit
  • One price list for the whole UK
  • Straight answers about what a repair can do

Read our pricing or bath cost comparison.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.