Surrey · England

Bath Repair in Pachesham Park

Chip and crack repairs to enamel, acrylic and cast iron baths in Pachesham Park, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Pachesham Park

How we handle bath repair in Pachesham Park

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. We are often asked to fix chips along the edge of the bath and rusty patches near the plughole, across pressed steel enamel, cast iron enamel and roll-top & freestanding.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Location
Pachesham Park (KT22)
County
Surrey
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Rust that has eaten right through a steel bath
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel

Common problems we fix in Pachesham Park

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Keep an eye out for any of the following:

  • Damage done while the bathroom was being fitted
  • Cracks in an acrylic bath
  • A kit repair that didn’t last
  • A chip where the taps sit

What to look for in a quote

  • How the room is protected while they work
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match
  • Whether cleaning and preparation are in the price

Choosing a repair company

How it works

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can usually use the bath the following day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Clear the area around the damage
  • Make sure the area is dry

Ask for a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Get a fixed price

Advice

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Do not leave razors or cans standing in the bath
  • Rinse it down after each bath
  • Stick to mild cleaners and a soft cloth
  • Fix dripping taps early to stop staining and limescale

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Repair or replace: which is better?

People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Pachesham Park clients choose us

  • Fixed prices from your pictures
  • Everything repaired in place
  • Same prices wherever you are
  • Generally one visit, start to finish

Take a look at our prices page and bath cost comparison.

What bath repair costs

Prices start from £95. We don’t charge extra for travel to Pachesham Park. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Whether we combine several jobs
  • Where the damage is and how we get to it

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Send photos for a quote

You can take the photos on your phone. Just make sure we can see:

  • One sharp close-up of the damage
  • Something in shot to show the size
  • Where you are, by postcode
  • Any details about the material

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

DIY kit or professional repair?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

Pachesham Park questions

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you repair a hole in a bath?

Generally. Send us a picture of the hole and one from under the bath if you can.

Are there extra charges for Pachesham Park?

Travel is included in the price, with the same prices everywhere we work.

Can rust on a bath be repaired?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

How long before I can use the bath?

Generally within a day, though it depends on what we have done.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

About Pachesham Park

Pachesham Park is about 2 miles north-west of Ashtead, in Surrey. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Our technicians cover all 395 towns and villages across Surrey. You can also see our page for London, about 16 miles away.

Every address in KT22 is within our area. Whether you live on Oaklawn Road, Oxshott Road and The Avenue or a nearby road, we can come to you. Neighbouring places we cover include Oxshott (1 mile north-west), Malden Rushett (1 mile north-east), Ashtead (2 miles south-east), Stoke D'Abernon (2 miles west) and Barwell (3 miles north). We also work in nearby towns such as Guildford (11 miles south-west), Woking (10 miles west), Epsom (3 miles east), Horley (12 miles south-east), Redhill (9 miles south-east) and Ewell (4 miles north-east).

What’s near Pachesham Park

Typical jobs here are in homes near The Royal Oak pub, Therfield School and Danes Hill School. Other local landmarks include River Mole LNR (2 miles south) and The Royal Kent CofE Primary School (1.2 miles north-west). The nearest railway station is Ashtead station, roughly 1.3 miles east. Nearby you will also find Epsom Cottage Hospital (2.2 miles north-east) and Elmbridge Museum (3.6 miles north). Green spaces nearby include The Lake and Jubilee Wood.

Map of Pachesham Park © OpenStreetMap contributors

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.