Cornwall · England
Bath Repair in Par
Fixed-price bath repair in Par and the surrounding area, usually in one visit.
- Repairs from £95
- A chip where the taps sit
- An old repair that has yellowed or come loose
Our work in Par
Par is about 4 miles east of St Austell, in Cornwall. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Par is one of 644 towns and villages in Cornwall where we work.
We cover every part of the PL24 postcode area and the streets around it. That includes homes on Dun Mere Close, Upper Eastcliffe Road and Moorland Road. Main roads around Par include the A3082, which makes travel easy. Neighbouring places we cover include Kilhallon (1 mile north-west), St Blazey (1 mile west), Lanescot (1 mile north), St Blazey Gate (1 mile west) and Porcupine (1 mile north). Within a short drive, we also cover St Austell (4 miles west), Bodmin (8 miles north), Liskeard (13 miles north-east), Sandy Bottom (3 miles west), Addington (13 miles north-east) and Bethel (3 miles west).
Near you in Par
Our customers here include homes close to Church of the Good Shepherd, The Royal Inn and Tywardreath School, among other places. There’s a railway station in Par itself: Par station. Further afield, we also cover the area around St Winnow Barton Farm Museum (3.1 miles north-east) and Fowey Community Hospital (2.9 miles east). Open spaces near Par include Red Moor nature reserve.
Bath repair in Par without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Typical jobs include rust spots around the plughole and a kit repair that didn’t last, on whirlpool & spa baths, pressed steel enamel and acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Par (PL24)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes a few hours. The room is left tidy and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Par: your questions answered
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What we cannot put right
To be straight with you, some problems need a different fix:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly before you book.
Materials we work on in Par
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Colour-matched on site
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
Take a look at our prices page and guide to resurfacing and replacement costs.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What affects the price in Par
Repairs from £95. We do not charge extra for travel to Par. The price depends on:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Access to the area
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Other services in Par
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
