Sheffield · England
Bath chip & crack repair in Parson Cross, Sheffield
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Parson Cross and across Sheffield. Free, fixed quotes from your photos.
- Repairs from £95
- Holes from dropped items
- Damage beneath the taps
FAQs for Parson Cross
Do you cover Parson Cross?
Yes. We work across the UK and come to Parson Cross and the rest of Sheffield. Send pictures and we’ll quote, or call 0345 017 0787.
How do I get a price for bath repair in Parson Cross?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
What areas do you cover?
The entire UK, including all of Sheffield. Send your postcode with your photos and we’ll offer you dates.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
How we handle bath repair in Parson Cross
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are holes from dropped items and hairline or through cracks in acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Parson Cross (S5, S6, S35)
- Region
- Sheffield
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Parson Cross
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Parson Cross use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Nearby places to Parson Cross
What else we do in Parson Cross
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Why book with us
- Fixed prices from your photos
- Colour mixed on the day to match
- Every repair guaranteed for a year
- Honest advice, even when it means no job
See our full price list or guide to resurfacing and replacement costs.
Our work in Parson Cross
Parson Cross is about 4 miles north of Sheffield, in Sheffield. Across the S5 area, we carry out the work at your property. We work in all 118 towns and villages across Sheffield. You can also see our page for Leeds, about 26 miles away.
All of S5, S6 and S35 is within our area, from the main roads to the quietest streets. From Edge Lane, Keats Road and Wolfe Road or anywhere nearby, a technician can come to you. If you are just outside Parson Cross, we cover Wadsley Bridge (1 mile south-west), Southey Green (1 mile south-east), Longley (1 mile south-east), Whitley (1 mile north) and Ecclesfield (1 mile north-east). Further out, we also cover Sheffield (4 miles south), Netherthorpe (3 miles south), Upperthorpe (3 miles south), West End (3 miles south), Broomhall (4 miles south) and Highfield (4 miles south).
Around Parson Cross
Typical jobs here are in homes near Yewlands Academy, Chaucer School and St Cecilia, among other places. You’ll also find Fox Hill Primary (under half a mile west) and Cow and Calf pub (0.8 miles north-west). The closest station to Parson Cross is Chapeltown station, about 2.5 miles north-east of the centre. Other landmarks nearby include Orchard Square (3.4 miles south) and Sheffield Castle (3.3 miles south). Open spaces near Parson Cross include Greno Woods.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- The type of damage
- Whether old repairs or coatings need taking off
- The material
Our prices are the same across the UK, with no extra for Parson Cross. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- Metal that has corroded all the way through
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Aftercare tips
Aftercare is simple:
- Do not leave a fresh chip for long
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
How it works
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
