Portsmouth · England

Bath chip & crack repair in Paulsgrove, Portsmouth

Bath repair across Paulsgrove and nearby, typically in one visit.

  • Repairs from £95
  • Holes from dropped items
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Paulsgrove

Bath repair in Paulsgrove without replacing anything

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re often asked to fix a chip where the taps sit and chips along the edge of the bath, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Before and after: a chipped, rust-stained bath around the plughole
Location
Paulsgrove (PO6)
Area hub
Portsmouth
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Work for landlords and builders

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.

Landlords, letting agents and housing providers in Paulsgrove use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

When we would advise against a repair

We won’t take on work that will not last, so here’s what a repair cannot put right:

  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through
  • A bath that moves underfoot, until its support is fixed

If in doubt, send photos and we will say what we think.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

What we do, step by step

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day
  • Mention if the room is upstairs or in a flat

Ask for a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.

Get a free quote

Read more

Where we work around Paulsgrove

Paulsgrove is about 3 miles north of Portsmouth, in Portsmouth. Anywhere in PO6, a technician comes to you. Paulsgrove is one of 19 towns and villages in Portsmouth we cover. Our jobs stretch from Paulsgrove to London (about 62 miles away).

Here we cover the PO6 postcode area. Streets in the area include Bourne Road, Ludlow Road and Farmlea Road. Paulsgrove sits on or near the M27 and A27, which makes travel easy. We also cover the places around Paulsgrove: Wymering (1 mile east), Cosham (1 mile east), Hilsea (2 miles south-east), Widley (2 miles east) and Purbrook Heath (2 miles north-east). Within a short drive, we also cover Portsmouth (3 miles south), Southsea (5 miles south), Milton (4 miles south), Landport (3 miles south), Baffins (3 miles south-east) and Portsea (4 miles south).

What’s near Paulsgrove

Locally, our jobs take us to homes close to St Michael and All Angels, Alexandra Park and The Sir Alec Rose pub, among other places. Nearby too are Castle View Academy (0.7 miles west) and Beacon View Primary Academy (under half a mile east). The closest station to Paulsgrove is Cosham station, about 1.2 miles south-east of the centre. Well-known places in the area include Queen Alexandra Hospital (1.1 miles east) and World War I Remembrance Centre (2.2 miles south-east). For a walk, there is Southmoor Nature Reserve and Portsdown Hill.

Map of Paulsgrove © OpenStreetMap contributors

Aftercare tips

So the finish stays in good condition:

  • Fix dripping taps early to stop staining and limescale
  • Don’t scrub with anything abrasive
  • Rinse the bath after use, especially in hard water areas
  • If an acrylic bath flexes, have its feet adjusted

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Why repair rather than replace?

Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.

What you get with us

  • Nothing taken out or refitted
  • Honest advice, even when it means no job
  • We leave the room as we found it
  • Accredited with CHAS, Constructionline and SafeContractor

Read our prices page or guide to resurfacing and replacement costs.

Questions from Paulsgrove

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

What does bath repair cost?

Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your PO6 postcode.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Signs you need bath repair in Paulsgrove

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

It’s worth getting a quote if you see:

  • Impact holes in acrylic
  • A failed DIY repair that is discoloured or lifting
  • Chips on the rim or sides
  • Rusty patches near the plughole

Questions to ask before booking

  • Whether they match the colour on site
  • What happens if the damage is worse than the pictures show
  • How soon you can use it again
  • What the guarantee covers, and for how long

Our hiring checklist

How we price bath repair

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • The material
  • The type of damage
  • The size and number of damaged areas
  • Doing more than one item at once

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To make it quick:

  • A coin or ruler next to the damage for scale
  • One picture of the whole bath
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.