Pembrokeshire · Wales
Bath Repair for Pentlepoir homes
Bath repair across Pentlepoir and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
Signs you need bath repair in Pentlepoir
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
You may need us if you’ve spotted any of these:
- A chip where the taps sit
- A kit repair that didn’t last
- A cracked acrylic bath
- A chipped rim or side
Comparing quotes
- What aftercare is recommended
- What protection goes down before work starts
- Whether the price covers travel
- What preparation is included
How we handle bath repair in Pentlepoir
A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We regularly repair pressed steel enamel, cast iron enamel and acrylic, and common reasons people get in touch are a hole punched through by something heavy and hairline or through cracks in acrylic.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Pentlepoir (SA68, SA69)
- Area hub
- Pembrokeshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Pentlepoir
Also in Pentlepoir
When a repair is not the answer
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we work on in Pentlepoir
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How to look after the repair
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Pentlepoir and the surrounding area
Pentlepoir is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Our repair technicians come to homes and businesses in Pentlepoir and nearby villages, so nothing has to leave your home. Pentlepoir is one of 223 places in Pembrokeshire where we work.
We work across the SA68 and SA69 postcode area. That includes homes on Green Park, Hawthorn Close and Millfield Close. Neighbouring places we cover include Wooden (1 mile south), Hill (1 mile north-east), The Valley (1 mile south-east), Kingsmoor (1 mile north-east) and Begeli (1 mile north). Larger places within reach include Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (9 miles west), Pembroke Dock (9 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (3 miles south).
Around Pentlepoir
Around Pentlepoir, we work in homes near Church Of St. Mary, Stepaside C.P. School and Woodridge Inn Hotel. There is a railway station in Pentlepoir itself: Saundersfoot station. Further afield, we also cover the area around Tudor Merchant's House Museum (3.6 miles south) and Castle Ring (0.8 miles north). Not far away are Pentlepoir Hill.
Questions from Pentlepoir
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do the materials smell?
Expect a mild smell while we are working.
Do you cover the entire of Pembrokeshire?
We work UK-wide, so Pentlepoir is covered. Prices do not change with location.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- One visit for most repairs
- A fixed quote before you book
- No need to remove anything
- One-year guarantee on every repair
Read our prices page or bath cost comparison.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
