Pembrokeshire · Wales
Bath Repair for Wooden homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Wooden and across Pembrokeshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our bath repair in Wooden
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with scratches you can feel with a fingernail and chips caused by builders, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Wooden and across Pembrokeshire.
- Area
- Wooden (SA69)
- Region
- Pembrokeshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Wooden
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
If you manage property in Wooden, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Wooden and nearby
Wooden is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Jobs in Wooden are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 223 places in Pembrokeshire.
All of SA69 is covered, from the main roads to the quietest streets. You’ll find streets such as Valley Road, Vineyard Vale and Valley Close, and we cover them all. Other places close to Wooden include The Valley (1 mile east), Pentlepoir (1 mile north), Hill (1 mile north-east), Kingsmoor (1 mile north-east) and Saundersfoot (1 mile east). Further out, we also cover Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (8 miles west), Pembroke Dock (9 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (3 miles south).
Landmarks near Wooden
Typical jobs here are in homes near Woodridge Inn Hotel and St Issell's Church and the streets around them. The closest station to Wooden is Saundersfoot station, about 0.6 miles north-east of the centre. Further afield, we also cover the area around Castle Ring (1.2 miles north) and Tudor Merchant's House Museum (3.3 miles south-east). The countryside around Wooden includes Pentlepoir Hill.
Repair or replace in Wooden?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Wooden
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- One visit for most repairs
- Dust sheets down, tidy finish
Take a look at our prices page and guide to resurfacing and replacement costs.
Do you need bath repair in Wooden?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
These are the problems we’re asked about most:
- A cracked acrylic bath
- Chips on the rim or sides
- A failed DIY repair that’s discoloured or lifting
- Damage done while the bathroom was being fitted
Comparing quotes
- How long the guarantee is and what it covers
- When it can be used again
- How the colour is matched
- How your room will be protected
More services for Wooden
FAQs for Wooden
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
How long does the repair take to cure?
Usually the following day. We’ll tell you the exact curing time when we finish.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Wooden
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Ask for a price
Most customers in Wooden get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
