Nottinghamshire · England
Bath chip & crack repair in Pleasley Hill, Nottinghamshire
Bath repair for Pleasley Hill, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Scuffs and scratches in the surface
- Impact holes in acrylic
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Most jobs done in one visit
- Same prices wherever you are
- We come to you, anywhere in the UK
- Rooms protected and left tidy
See our full price list and bath cost comparison.
Bath repair in Pleasley Hill without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s deep scratches in acrylic and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Pleasley Hill (NG19)
- Region
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Pleasley Hill
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Keeping it looking good
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What we are called out for in Pleasley Hill
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Get in touch if you’ve noticed any of these:
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
- Chips under the taps
- Holes from dropped items
Questions to ask before you book
- If travel is included in the price
- The length of the guarantee and what it covers
- Who will actually do the work
- How long it needs to cure
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Where we work around Pleasley Hill
Pleasley Hill is about 2 miles north-west of Ladybrook, in Nottinghamshire. Jobs in Pleasley Hill are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Pleasley Hill is one of 329 towns and villages in Nottinghamshire where we work. We work right across the region, from Pleasley Hill to Manchester (46 miles away).
Postcode districts we cover here: NG19. Jobs here include addresses on Water Lane, Cator Road and Church Lane and the roads around them. Pleasley Hill is on the A617, so it’s easy for us to reach. Neighbouring places we cover include Pleasley (1 mile west), New Houghton (1 mile north-west), Stony Houghton (2 miles north-west), Ladybrook (2 miles south-east) and Rowthorne (2 miles west). Further out, we also cover Mansfield (3 miles south-east), Carlton (15 miles south-east), Worksop (11 miles north-east), Sutton in Ashfield (3 miles south), Hucknall (10 miles south) and Eastwood (11 miles south).
Local landmarks in Pleasley Hill
We visit homes around All Saints Catholic Voluntary Academy, St Barnabas' Church and The White Swan pub. The nearest railway station is Mansfield Woodhouse station, about 1.6 miles east of the centre. Other landmarks nearby include King's Mill Hospital (2.4 miles south) and Bolsover Castle (4.8 miles north-west).
Places near Pleasley Hill
More services for Pleasley Hill
Landlords, agents and businesses in Pleasley Hill
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
