Caerphilly · Wales

Bath Repair in Pontymister

Bath repair across Pontymister and nearby, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Chips under the taps
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Pontymister

Keeping it looking good

To keep it looking its best:

  • Get any new chip repaired before it rusts
  • Clean with warm water and a mild detergent
  • If an acrylic bath flexes, have its feet adjusted
  • Put a towel in the bath if you’re working above it

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

Bath repair in Pontymister, done in place

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. We work on cast iron enamel, acrylic and whirlpool & spa baths, and people most often call us about holes from dropped items and hairline or through cracks in acrylic.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Pontymister (NP11, NP10)
Area hub
Caerphilly
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.

Send photos for a quote

Read more

FAQs for Pontymister

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

How long before I can use the bath?

Normally by the following day, though it depends on what we have done.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before and we will plan for it.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A steel bath rusted through
  • Leaking fittings, which need a plumber
  • A bath that moves underfoot, until its support is fixed

If in doubt, send photos and we’ll say what we think.

What we work on

  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding

Pontymister and the surrounding area

Pontymister is about 1 mile south of Risca, in Caerphilly. Customers in Pontymister get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Pontymister is one of 94 towns and villages in Caerphilly we cover. You can also see our page for Birmingham, about 79 miles away.

Our repair technicians cover all of NP11 and NP10 and the streets around it. You’ll find streets such as Maryland Road, Brookland Road and Commercial Lane. If you’re just outside Pontymister, we cover Danygraig (1 mile north-west), Glenside (1 mile north-west), Newtown (2 miles north-west), Pontywaun (2 miles north-west) and Wattsville (2 miles north-west). Within a short drive, we also cover Caerphilly (6 miles west), Blackwood (6 miles north-west), Ystrad Mynach (7 miles north-west), Cefn Fforest (7 miles north-west), Pontllanfraith (5 miles north-west) and Trecceln (5 miles north).

Near you in Pontymister

Typical jobs here are in homes near Risca Community Comprehensive School, Commercial Inn and Ty Isaf Infants & Nursery School. The nearest railway station is Risca & Pontymister station, about 0.5 miles north-east of the centre. Well-known places in the area include Rhyd-y-gwern (2.2 miles south-west) and Castell Machen (1 mile south-west). For a walk, there’s Mynydd Machen.

Map of Pontymister © OpenStreetMap contributors

When to call us in Pontymister

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

People usually call us after spotting one of these:

  • Chips along the edge of the bath
  • Scuffs and scratches in the surface
  • Rust spots around the plughole
  • A chip where the taps sit

Questions to ask before you book

  • If travel is included in the price
  • How the colour is matched
  • How changes to the job are handled
  • What the guarantee covers, and for how long

Our hiring checklist

Repair or replace in Pontymister?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.

What you get with us

  • Nothing taken out or refitted
  • Straight answers about what a repair can do
  • We leave the room as we found it
  • We come to you, anywhere in the UK

Read our prices page or bath cost comparison.

Landlords, agents and businesses in Pontymister

Landlords, letting agents and housing providers in Pontymister use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

For anyone letting property in or around Pontymister, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

What affects the price in Pontymister

Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • The size and number of damaged areas
  • Unusual colours or finishes

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

We price nearly every job from photos. This is what to send:

  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • A close-up of the damage, in focus
  • What it’s made of, if you know

For a price in Pontymister, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.