Kent · England
Bath Repair in Potters Corner
Bath repair for Potters Corner, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A chipped rim or side
- Cracks in an acrylic bath
How it works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, and we’ll tell you if anything changes.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Bath repair in Potters Corner without replacing anything
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Whether it’s scuffs and scratches in the surface and holes from dropped items, we can help, on acrylic, pressed steel enamel and cast iron enamel alike.
Big or small, it’s backed by a one-year guarantee.
- Location
- Potters Corner (TN25, TN26)
- County
- Kent
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we will tell you honestly.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Aftercare tips
How the surface is treated afterwards matters:
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Potters Corner and the surrounding area
Potters Corner is about 2 miles north of Ashford, in Kent. From the centre of Potters Corner to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Potters Corner is one of 922 places in Kent where we work. You can also see our page for London, about 47 miles away.
Our visits in TN25 and TN26 are booked in the same way as anywhere else. You will find streets such as Kingsland Lane, Sandyhurst Lane and Westwell Lane, and we cover them all. Other places close to Potters Corner include Bockhanger (1 mile south-east), Godinton (1 mile south), Westwell (1 mile north), Hothfield (1 mile west) and Kennington (1 mile east). Further out, we also cover Canterbury (12 miles north-east), Sittingbourne (13 miles north-west), Folkestone (15 miles south-east), Whitstable (15 miles north-east), Faversham (10 miles north) and Hythe (12 miles south-east).
Landmarks near Potters Corner
We visit homes around Towers School and Sixth Form Centre, The Hayesbrook School and Ashford Warren and Hoads Wood, among other places. Potters Corner’s nearest station is Ashford International station, roughly 2.2 miles south-east of the centre. Other landmarks nearby include County Square (1.8 miles south-east) and William Harvey Hospital (3.4 miles south-east). The countryside around Potters Corner includes Hatch Park.
What we’re called out for in Potters Corner
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Send us a photo if you notice any of these:
- A cracked acrylic bath
- Chips caused by builders
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- What protection goes down before work starts
- How changes to the job are handled
- When it can be used again
- What prep work is covered
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Potters Corner questions
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you cover Potters Corner?
Yes. We cover the entire UK and travel to Potters Corner. Send pictures and we will quote, or call 0345 017 0787.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
How much does bath repair cost in Potters Corner?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Also near Potters Corner
Other services in Potters Corner
Repair or replace in Potters Corner?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why us?
- Most jobs done in one visit
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
