South Gloucestershire · England
Bath chip & crack repair in Pucklechurch, South Gloucestershire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Pucklechurch. Free, fixed quotes from your photos.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips under the taps
How we handle bath repair in Pucklechurch
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with a hole punched through by something heavy and a chip where the taps sit, we can usually put it right.
You get a one-year guarantee, the same in Pucklechurch as everywhere else we work.
- Area
- Pucklechurch (BS16)
- Area hub
- South Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Pucklechurch
Pucklechurch is about 3 miles east of Mangotsfield, in South Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 110 towns and villages in South Gloucestershire, from the larger towns to small villages. We work right across the region, from Pucklechurch to Birmingham (72 miles away).
Here we cover the BS16 postcode area. Jobs here include addresses on Cedar Way, Birch Drive and Oaktree Avenue and the roads around them. If you are just outside Pucklechurch, we cover Abson (1 mile south), Parkfield (1 mile north-west), Siston (1 mile south-west), Shortwood (2 miles west) and Doynton (2 miles south-east). Further out, we also cover Kingswood (3 miles south-west), Mangotsfield (3 miles west), Yate (4 miles north), Fishponds (4 miles west), Bradley Stoke (6 miles north-west) and Thornbury (10 miles north).
Landmarks near Pucklechurch
We visit homes around Mangotsfield School, Church of St Thomas à Becket and Pucklechurch CofE VC Primary School, among other places. Pucklechurch’s nearest station is Yate station, roughly 4 miles north. A little further out are Willsbridge Castle (4.1 miles south-west) and Kingswood Heritage Museum (2.9 miles south-west). For a walk, there is Lodge Hill.
When a repair is not the answer
A repair is not right for every job, for example:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Landlord and trade work in Pucklechurch
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
More services for Pucklechurch
Pucklechurch questions
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Are there extra charges for Pucklechurch?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across South Gloucestershire.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Repair or replace in Pucklechurch?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why book with us
- Straight answers about what a repair can do
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our prices page and bath cost comparison.
Do you need bath repair in Pucklechurch?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
You may need us if you’ve spotted:
- A hole punched through by something heavy
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- A chip where the taps sit
Before you book anyone
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- How the colour is matched
- Whether cleaning and preparation are in the price
How we price bath repair
Prices start from £95. There is no area surcharge for Pucklechurch. The price reflects:
- Whether we combine several jobs
- The size and number of damaged areas
- How hard the colour is to match
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Getting a price from photos
Phone photos are fine. Ensure they show:
- Details of any past repairs
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- A picture taken from further back
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Make sure the area is dry
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
About our accreditations · Every repair comes with a one-year guarantee.
