South Gloucestershire · England
Bath Repair in Abson
Problem with your bath in Abson? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Holes from dropped items
Bath repair in Abson, done in place
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. We regularly repair cast iron enamel, roll-top & freestanding and pressed steel enamel, and the jobs we see most are chips on the rim or sides and damage done while the bathroom was being fitted.
Big or small, you get the same one-year guarantee in Abson and across South Gloucestershire.
- Location
- Abson (BS30)
- County
- South Gloucestershire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Abson
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Nearby places to Abson
Also in Abson
Repair or replace in Abson?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in Abson
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Every repair guaranteed for a year
Take a look at our pricing or bath cost comparison.
Common problems we fix in Abson
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Keep an eye out for these signs:
- A chip where the taps sit
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- Chips along the edge of the bath
What your quote should include
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What the guarantee covers, and for how long
- When it can be used again
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- If an acrylic bath flexes, have its feet adjusted
- Don’t scrub with anything abrasive
- Put a towel in the bath if you’re working above it
- Get a dripping tap fixed promptly
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Our work in Abson
Abson is about 3 miles south-east of Mangotsfield, in South Gloucestershire. Customers in Abson get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover 110 places in South Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 73 miles away.
Postcode districts we cover here: BS30. Close by, we cover Pucklechurch (1 mile north), Siston (1 mile west), Wick (1 mile south), Doynton (1 mile south-east) and Bridgeyate (2 miles south-west). Larger places within reach include Kingswood (3 miles south-west), Mangotsfield (3 miles north-west), Yate (5 miles north), Fishponds (5 miles west), Bradley Stoke (7 miles north-west) and Thornbury (10 miles north).
Landmarks near Abson
Typical jobs here are in homes near Church of St James the Great, Digitech Studio School and Pucklechurch CofE VC Primary School and the streets around them. The nearest railway station is Yate station, about 4.8 miles north of the centre. Other landmarks nearby include Kingswood Heritage Museum (2.6 miles south-west) and Cossham Memorial Hospital (3.9 miles west). Not far away are Lodge Hill.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- What the surface is made of
- Whether old repairs or coatings need taking off
- How many areas need work
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- A picture taken from further back
- A coin or ruler next to the damage for scale
- The material, if you know it
Upload pictures of the damage and one of the whole item, with your BS30 postcode, and we’ll come back with a fixed quote.
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours. Before leaving, we tell you when it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
Before we arrive
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say right away whether it can be repaired.
Advice
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
