South Gloucestershire · England

Bath chip & crack repair in Wick, South Gloucestershire

Chip and crack repairs to enamel, acrylic and cast iron baths in Wick, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Wick

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Wear across the entire surface, which needs re-enamelling
  • Metal that has corroded all the way through
  • Acrylic cracks with no access behind them

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel

Bath repair in Wick without replacing anything

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. If you’re dealing with holes from dropped items and cracks in an acrylic bath, we can usually put it right.

Whatever the size of the job, it’s backed by a one-year guarantee.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Wick (BS30)
Region
South Gloucestershire
Cover
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Wick and nearby

Wick is about 3 miles east of Kingswood, in South Gloucestershire. Whether you are in the middle of Wick or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Wick is one of 110 towns and villages in South Gloucestershire where we work. Our nearest city page is Birmingham, about 74 miles away.

Every address in BS30 is covered. That includes homes on Church Road, High Street and London Road and the roads around them. We also cover the places around Wick: Bridgeyate (1 mile west), Abson (1 mile north), Doynton (1 mile north-east), Beach (1 mile south) and Siston (2 miles north-west). Further out, we also cover Kingswood (3 miles west), Mangotsfield (4 miles north-west), Yate (6 miles north), Fishponds (5 miles west), Bradley Stoke (7 miles north-west) and Thornbury (11 miles north).

Local landmarks in Wick

In Wick, that means homes near Carpenter's Arms, Sir Bernard Lovell School and Church of St Bartholomew and the streets around them. The closest station to Wick is Keynsham station, roughly 3.8 miles south-west of the centre. Nearby you’ll also find Cossham Memorial Hospital (3.7 miles west) and Willsbridge Castle (2.7 miles south-west). Not far away are Lodge Hill.

Map of Wick © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • Any earlier repairs that need removing first
  • Access to the area
  • The colour and finish to match
  • Whether we combine several jobs

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from photos

Two or three clear pictures are typically enough. Try to include:

  • The material, if you know it
  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath
  • Whether it’s been repaired or coated before

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.

Repairing versus replacing in Wick

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why Wick clients choose us

  • Colour-matched on site
  • We come to you, anywhere in the UK
  • Fixed prices from your pictures
  • Rooms protected and left tidy

Take a look at our prices page and resurfacing vs replacement cost guide.

Common questions in Wick

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

What happens next?

We come back with a fixed quote. You are under no obligation.

Can you repair something that is been repaired before?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What areas do you cover?

The whole UK, including all of South Gloucestershire. Just include your postcode and we’ll confirm dates.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in South Gloucestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

When to call us in Wick

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Customers usually contact us about:

  • Holes from dropped items
  • Scratches you can feel with a fingernail
  • A chip where the taps sit
  • A cracked acrylic bath

What your quote should include

  • Whether a trained technician does the job
  • What the guarantee covers, and for how long
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges

Our hiring checklist

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work
  • Clear toiletries, mats and anything else from around the area

Ask for a price

To get a price, send a couple of pictures through our quote form or call us. We’ll say straight away whether it can be repaired.

Send photos for a quote

Related advice

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Stick to mild cleaners and a soft cloth
  • Ensure an acrylic bath is firm underfoot
  • Rinse the bath after use, especially in hard water areas
  • Don’t leave a fresh chip for long

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.